TRD3000GT Posted June 10, 2005 Share Posted June 10, 2005 ok its 3 am and some silver supra just had a play at cruzing passed me.. Little did he know.. Link to comment Share on other sites More sharing options...
Elliot Posted June 10, 2005 Share Posted June 10, 2005 We want the full story! Not the edited version! Link to comment Share on other sites More sharing options...
Ben-san Posted June 10, 2005 Share Posted June 10, 2005 Heh heh, little did ArghJae & I know either, when we met up with our two stock twinnies, we heard Chris before we saw him. What was Mr. Silver thinking? Did it have blue graphics and a TRD wing by any chance? B Link to comment Share on other sites More sharing options...
Gaz Walker Posted June 10, 2005 Share Posted June 10, 2005 Fully story please! Any engine bay photos yet Chris? Gaz. Link to comment Share on other sites More sharing options...
kosmic Posted June 10, 2005 Share Posted June 10, 2005 Yep, is it running alright now Chris?? Lil ride that your gonna take me for?! Link to comment Share on other sites More sharing options...
TRD3000GT Posted June 10, 2005 Author Share Posted June 10, 2005 sock body silver supra with different wheels... passed supra fly then came for me.. he was doing about 40 mph more than me about 100 meters off my rear and I just planted it needless to say there was a lot of noise and I think he was pretty shocked Link to comment Share on other sites More sharing options...
TRD3000GT Posted June 10, 2005 Author Share Posted June 10, 2005 she is stilloverboosting... Going to Owen next week for a wideband air/fuel setup and some tweaking and then Ill be taking people for rides again Link to comment Share on other sites More sharing options...
Guest Terry S Posted June 10, 2005 Share Posted June 10, 2005 whats she boosting too?? Link to comment Share on other sites More sharing options...
TRD3000GT Posted June 10, 2005 Author Share Posted June 10, 2005 over 1.4 bar Link to comment Share on other sites More sharing options...
Guest Terry S Posted June 10, 2005 Share Posted June 10, 2005 over 1.4 bar yeah 0.01 bar over or 0.7 of a bar over Link to comment Share on other sites More sharing options...
TRD3000GT Posted June 10, 2005 Author Share Posted June 10, 2005 its kind of getting to 1.6 at times.. What do you think? I should have it tweaked to stick at 1.4 Link to comment Share on other sites More sharing options...
Alex Posted June 10, 2005 Share Posted June 10, 2005 What's controlling the boost? MoTeC? Link to comment Share on other sites More sharing options...
TRD3000GT Posted June 10, 2005 Author Share Posted June 10, 2005 yup.. The motec is, Ive been told that it knows exactly whats going on with the engine and fueling is spot on? but Im still considering tuning it down to 1.4 Link to comment Share on other sites More sharing options...
Miguel Posted June 10, 2005 Share Posted June 10, 2005 Not that the Motec one aint any good , but i would still use a seperate Boost controller and let the Motec keep its ref point for boost so it still knows whats going on . The advantage to having a seperate boost contoller is that you can self ajust for problems or race days ..without having to fire up the laptop all the time...just a thought . Link to comment Share on other sites More sharing options...
Guest Terry S Posted June 10, 2005 Share Posted June 10, 2005 What's controlling the boost? MoTeC? well whatever it is isnt working, as the WG spring is 1.1 bar Chris, if you want longevity I would aim for 1.3 bar, mine runs 1.2 on the street Alex has a good point tho, what is controlling it?? You must remember you have no knock control now with the Motec Link to comment Share on other sites More sharing options...
Guest Usmann A Posted June 10, 2005 Share Posted June 10, 2005 Yep, major downside im afraid .. no knock cont. :thumbdown now you see what we mean when were talking about EMS that are for race cars only .... for a road car, knock feedback is very important. Whilst I agree that phantom noise on the big boosting single can somewhat throw off the sensor, but hey, its those that take the time on the dyno to filter this out and tinker with the timing until its right ... Be nice, that my lil old AEM will retard timing and increace fueling, and decreace boost upon a higher V reading. Whos your Daddy now? edit, re, the boost control, you can have the EMS control it, and feed it into a potentioal meter(dial) and play with the V vs boost reading and calibrate it so that you can send the EMS a seperate reading(fudged) from its own sensor so that you can control the feedback, and adjust the boost. Link to comment Share on other sites More sharing options...
TRD3000GT Posted June 10, 2005 Author Share Posted June 10, 2005 the motec is hooked up and utilises all of the stock knock sensors Link to comment Share on other sites More sharing options...
Guest Terry S Posted June 10, 2005 Share Posted June 10, 2005 the motec is hooked up and utilises all of the stock knock sensors you sure about that?? Link to comment Share on other sites More sharing options...
TRD3000GT Posted June 10, 2005 Author Share Posted June 10, 2005 yes. I specifically asked this when the car was being tuned.... Otherwise I would have gone with the Fcon as I know after lots of conversations with you that it does deal with knock. Link to comment Share on other sites More sharing options...
Guest Usmann A Posted June 10, 2005 Share Posted June 10, 2005 well shane at motec USA tells me different. Motec would rather conquer the FBW as alot of race cars use this, but no knock control .. Link to comment Share on other sites More sharing options...
Guest Terry S Posted June 10, 2005 Share Posted June 10, 2005 yes. I specifically asked this when the car was being tuned.... Otherwise I would have gone with the Fcon as I know after lots of conversations with you that it does deal with knock. I am not convinced of that Chris, think it needs investigation TBH. Link to comment Share on other sites More sharing options...
Miguel Posted June 10, 2005 Share Posted June 10, 2005 Correct me if I'm wrong here but the VVTi shuts the TB when it sences Knock as well as pulling timing ...Seeing as Motec have not yet sussed FBW and the VVTi runs it and ( could also be wrong here) that you have had to rid the car of th FBW for a stock TB ..then how does it have full knock control???? Link to comment Share on other sites More sharing options...
TRD3000GT Posted June 10, 2005 Author Share Posted June 10, 2005 I will dig deeper.. I am considerign running an HKS a/f knock amp setup for piece of mind. Link to comment Share on other sites More sharing options...
Guest Usmann A Posted June 10, 2005 Share Posted June 10, 2005 exactly miggles, but it doesnt even have a simple normal knock control, ie, V relayed back to the ECU to make knock adjustments ... AFAIK, forget the Vvti one .. Link to comment Share on other sites More sharing options...
Guest Terry S Posted June 10, 2005 Share Posted June 10, 2005 I will dig deeper.. I am considerign running an HKS a/f knock amp setup for piece of mind. And what exactly do you expect the knock amp to do to prevent detonation Chris?? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now