Steve Posted June 9, 2005 Share Posted June 9, 2005 Got my 02 kit today from Dusty(Thanks). How do people route the cable to the sensor? Also where do you get the power from? Can you just use the power connections or should you wire the signal wire to say an emanage unit? Thanks Link to comment Share on other sites More sharing options...
SimonB Posted June 9, 2005 Share Posted June 9, 2005 There's a rubber grommit under the passenger seat that I used. Mine has a control box that I mounted on the transmission tunnel by the ECU. Power I took from the ECU. If you have the signal wire connected to an Emanage say then you should use the same power and ground connections as the thing you have it connected to. Link to comment Share on other sites More sharing options...
Steve Posted June 9, 2005 Author Share Posted June 9, 2005 Is it worth connecting it to the emanage? Or just keep it seperate? Link to comment Share on other sites More sharing options...
Ian C Posted June 10, 2005 Share Posted June 10, 2005 Wire the 5v signal output from the gauge to the yellow wire going into the E-Manage -Ian Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now