RedT18 Posted August 20, 2010 Share Posted August 20, 2010 Hey guys, I need to get new side skirts for my car coz those I have now show some cracks. I am planning to do a complete new paint job on the car this winter and I dont want to fix the cracks coz it will crack again I think. So, my problem is, that I want to replace my skirts by new ones which should be the same but I dont know who is the manufacturer of them. I attached some pics, maybe someone of you can identify them. Thank you in advance! http://img90.imageshack.us/img90/3481/img0003ec.jpg http://img541.imageshack.us/img541/1906/img0008q.jpg http://img202.imageshack.us/img202/4012/img0050vy.jpg Link to comment Share on other sites More sharing options...
dwayne Posted August 20, 2010 Share Posted August 20, 2010 top secret skirts and rear spats Link to comment Share on other sites More sharing options...
RedT18 Posted August 20, 2010 Author Share Posted August 20, 2010 thanks a lot! Link to comment Share on other sites More sharing options...
dwayne Posted August 20, 2010 Share Posted August 20, 2010 no probs. you might want to try repairing what you have though cos as far as i know they are hard to get hold of (i could be wrong) Link to comment Share on other sites More sharing options...
evinX Posted August 20, 2010 Share Posted August 20, 2010 they are hard to find, you know why they have likes of crackles, its the gel coat that goes on the fibreglass, i used to have a set, sand the cracks away and skim filler over it, sounds worse but fillers is going to be more stonger and flexible than the cheap gel coat that is used on replicas Link to comment Share on other sites More sharing options...
nevins Posted August 20, 2010 Share Posted August 20, 2010 Use stoppers not fillers its more flexible fella Link to comment Share on other sites More sharing options...
dwayne Posted August 20, 2010 Share Posted August 20, 2010 mine cracked from the fixing hole at the back about an inch long straight around to the face of the skirt. i did a similar thing but i drilled a small hole at the end of the crack to stop it going further then scored the crack to make it about 2mm wide (not all the way through). after that i used that ready mixed fibreglass stuff from halfords and finished with filler to keep it neat cos the fibreglass left a few pin holes when sanded. slightly off topic but does anyone know how to identify top secret originals from cheaper copies? Link to comment Share on other sites More sharing options...
nevins Posted August 20, 2010 Share Posted August 20, 2010 They quality and they will be branded on the inside. Link to comment Share on other sites More sharing options...
dwayne Posted August 20, 2010 Share Posted August 20, 2010 ahh thanks. i was wondering about mine cos the fit is near perfect but i have no branding so they cant be. i must have been lucky with a good set of copies cos i have seen some pretty bad ones in the past Link to comment Share on other sites More sharing options...
j_jza80 Posted August 20, 2010 Share Posted August 20, 2010 ahh thanks. i was wondering about mine cos the fit is near perfect but i have no branding so they cant be. i must have been lucky with a good set of copies cos i have seen some pretty bad ones in the past My genuine ones on my last car had no Top Secret markings. The side skirts had jacking point markers moulded into them though, and the front bumper had the full undertray. Link to comment Share on other sites More sharing options...
evinX Posted August 21, 2010 Share Posted August 21, 2010 Use stoppers not fillers its more flexible fella Im not sure dude, stoppers are used to sort out pin holes and tiny marks in filler Link to comment Share on other sites More sharing options...
miles Posted August 21, 2010 Share Posted August 21, 2010 Nice car btw if its yours, good mix of kits Link to comment Share on other sites More sharing options...
Supralad Posted August 21, 2010 Share Posted August 21, 2010 wat front bumper is that? Link to comment Share on other sites More sharing options...
nevins Posted August 21, 2010 Share Posted August 21, 2010 Ridox bumper fella. Link to comment Share on other sites More sharing options...
monsween Posted August 21, 2010 Share Posted August 21, 2010 Thats a reallu nice combo of kit youve got there dude. Full marks Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now