Guest philrach Posted July 15, 2010 Share Posted July 15, 2010 HI all, i have read a topic explaining how to strip the front lights down to get rid of the yellowness however i have 1 question. I have heard a few people talking about putting the light in the oven to softenand heat up the mastic. Can someone please explain this a bit more to me, how long for? how hot? Also instead of the oven someone mentioned a heat gun, can a hair dryer be used or is that not hot enough? just dont wana do it wrong! cheers Quote Link to comment Share on other sites More sharing options...
Neil-NA Posted July 15, 2010 Share Posted July 15, 2010 Have a read here. http://www.mkivsupra.net/vbb/showthread.php?t=186797 Quote Link to comment Share on other sites More sharing options...
scotty71 Posted July 15, 2010 Share Posted July 15, 2010 (edited) done a load of these now, 80 degrees C for 5 mins.... no longer. Keep checking them and after the 5 mins they will pull apart takes a good pull to get it going. Use plastX and a rotary on lowish speed to clean the lenses up inside and out. Spray n sort the insides as you have them open, job done Edited July 15, 2010 by scotty71 (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.