johnd-mkiv Posted July 12, 2010 Share Posted July 12, 2010 Been asking on a few forums about this now but not much help I have a 1jz with the following ecu pin outs I have an emanage blue that I need to cut an splice in, fairly sure I have that sorted, its the injector harness thats confusing me. The 1jz has paired injectors when going back to the ecu (can some one explain why they do this) they are shown x11 x12 x25 in the diagram above. when looking on the greddy site http://www.greddy.com/upload/file/e-manage_Blue_Install.pdf page 23 it shows the pairing to be 6 cylinder engine with 3 signal injector wire) Inj channel 1 --------------------> ECU #1 Inj channel 2 Inj channel 3 -------------------> ECU #2 Inj channel 4 Inj channel 5 -------------------> ECU #3 Inj channel 6 is this the correct way to wire up I have been given other links but theres two other ways on there all seem to be runners which is confusing me http://www.supramania.com/forums/sho...eManage-on-1JZ http://www.toymods.org.au/forums/arc...p/t-57012.html http://www.skylinesaustralia.com/for...ed&pid=5107767 http://www.supraforums.com/forum/sho...d.php?t=565295 Help me please Quote Link to comment Share on other sites More sharing options...
johnd-mkiv Posted July 13, 2010 Author Share Posted July 13, 2010 not looking good Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.