David P Posted July 10, 2010 Share Posted July 10, 2010 (edited) Suprastick version 4.6 There has been curiosity from some re. this device, so now I have wired it in and started playing with it, I can tell more about it. It is compatible with the N/A auto box, but not the T.T. (The T.T. box has more solenoids) It has a 'manualised' function, a la 'flappy paddle' gear change. To control this I have used a Supra tiptronic wheel, but any buttons or even a cruise control stalk will work. The flappy paddle function is great fun to play with when not around town. At the flick of a switch it returns to auto, this can be auto mapped from the OEM ECU signals. However, I could not get this function to work, but as I plan to replace the OE ECU with a standalone AEM, it was only a matter of time, so I have written my first combi map controlled by throttle position. 1 -25% Around town low rev 'trundle' map. 26 -50% 'Eco' map. 51 -75% A 'getting on with the job' map. 76 - 100% A 'red liner' in all gears map. There are many other adjustable parameters that I am working out by trial and test. The only down side is, there is no engine braking when changing down from 3rd into 2nd, because the brake bands are manually controlled by the stick, but the up side is, I can install the AEM ECU with no concerns re. the trans or rolling road. All in all, a lot of fun for £250. There are links to more info in 'my car', (link below) and pics in the album in my profile. Edited July 10, 2010 by David P (see edit history) Quote Link to comment Share on other sites More sharing options...
Shane Posted July 10, 2010 Share Posted July 10, 2010 Suprastick version 4.6 There has been curiosity from some re. this device, so now I have wired it in and started playing with it, I can tell more about it. It is compatible with the N/A auto box, but not the T.T. (The T.T. box has more solenoids) It has a 'manualised' function, a la 'flappy paddle' gear change. To control this I have used a Supra tiptronic wheel, but any buttons or even a cruise control stalk will work. The flappy paddle function is great fun to play with when not around town. At the flick of a switch it returns to auto, this can be auto mapped from the OEM ECU signals. However, I could not get this function to work, but as I plan to replace the OE ECU with a standalone AEM, it was only a matter of time, so I have written my first combi map controlled by throttle position. 1 -25% Around town low rev 'trundle' map. 26 -50% 'Eco' map. 51 -75% A 'getting on with the job' map. 76 - 100% A 'red liner' in all gears map. There are many other adjustable parameters that I am working out by trial and test. The only down side is, there is no engine braking when changing down from 3rd into 2nd, because the brake bands are manually controlled by the stick, but the up side is, I can install the AEM ECU with no concerns re. the trans or rolling road. All in all, a lot of fun for £250. There are links to more info in 'my car', (link below) and pics in the album in my profile. Hey David, Glad to see you got it working and well done as I know it wasn'nt easy. . Sounds though you are pleased wwith the results. Look forward to a demo sometime. Quote Link to comment Share on other sites More sharing options...
David P Posted July 10, 2010 Author Share Posted July 10, 2010 (edited) Hello Shane, The wiring instructions are very much, 'it will work if you can work it out'. Yet after my apprenticeship sorting out the active spoiler, cruise control and electric adjusting headlamps retrofits, I am getting dab hand with Supra electrickery. But to be fair, Garrett Rowe has been very helpfull by email. It appears this is the first time one of these has been fitted into a Supra Mk4, quite bizarre for a device called 'Suprastick V4'. I will drop by and take you for a flappy blast, but be warned, you will want one too. Edited July 11, 2010 by David P (see edit history) Quote Link to comment Share on other sites More sharing options...
Shane Posted July 10, 2010 Share Posted July 10, 2010 Hello Shane, The wiring instructions are very much, 'it will work if you can work it out'. Yet after my apprenticeship sorting out the active spoiler, cruise control and electric adjusting headlamps retrofits, I am getting dab hand with Supra electickery. But to be fair, Garrett Rowe has been very helpfull by email. It appears this is the first time one of these has been fitted into a Mk4 Supra, quiet odd for a device called 'Suprastick V4'. I will drop by and take you for a flappy blast, but be warned, you will want one too. Ok look forward to it. Working in France Monday through to Thursday next week and then London as normal on Friday so won't be about. But look forward to a blast when I get back. Will give you a blast in the silver one and I reckon you might want one of them, be warned... Got it almost there now mechanically, couple of little niggles to sort out but am getting there. Speak soon and well done, it's good to be a pioneer eh! Quote Link to comment Share on other sites More sharing options...
David P Posted July 10, 2010 Author Share Posted July 10, 2010 (edited) I am busy too, tomorrow I am taking the prop out to measure the gap, then only to put it back in again. A job for nothing, but have been let down 3 times with the measurement, so there is no other way. Then to do something positive, take out the cat that's not needed, finish wrapping the exhaust manifold and advance the timing up to 19oBTDC. That should give it a smidgen more. The adapter for the oil filter has eventually turned up, so I can get on with the relocation and oil cooler hook up this week. I then want to start getting the water/meth system in and begin the HHO installation. I am trying to get it finished and on the rollers, then will take it to the august meet. Will come and play Supragames somewhere inbetween. Parle' 'bonjour' a' Frogtopia pour moi. Edited July 11, 2010 by David P (see edit history) Quote Link to comment Share on other sites More sharing options...
Andy-No-Knee Posted July 11, 2010 Share Posted July 11, 2010 Hi Dave, how did you connect up the flappy wheel? When I looked at doing this I couldnt see hot to connect it so I ended up using the cruse control stalk. The problem I found was there were not enough contact rings on the steering columb or did you replace those as well?? Cheers, Andy Quote Link to comment Share on other sites More sharing options...
David P Posted July 11, 2010 Author Share Posted July 11, 2010 Andy, I used a column loom from a J spec T.T. which has a 6 wire plug in the whirlygoround, and 2 more for the air bag making 8. I don't have airbags, so; 1. Earth for horn 2. Cruise 3. Cruise 4. Cruise 5. Live in for tipronic buttons 6. Up control out 7. Down control out 8. Spare Hope that helps. Quote Link to comment Share on other sites More sharing options...
Andy-No-Knee Posted July 11, 2010 Share Posted July 11, 2010 Do you have any photos of the loom and the plugs, I want to see if they are the same on a Soarer...if they are I can feel a new loom in the offing and some buttons on my wheel coming!!! Quote Link to comment Share on other sites More sharing options...
Morpheus Posted July 11, 2010 Share Posted July 11, 2010 Hi again Dave, I'll deffo be bending your ear about this setup one day, probably for one year! Won't be for a long while though so you'll have the HHO in by then as well. I'll send the timing belt soon; been busy lately with the garden wall. Quote Link to comment Share on other sites More sharing options...
David P Posted July 11, 2010 Author Share Posted July 11, 2010 Carlos, Next time I get over to Keron's place, I will take a photo of a column loom for you. Quote Link to comment Share on other sites More sharing options...
David P Posted July 11, 2010 Author Share Posted July 11, 2010 (edited) Beast, Cheers, that will go in when I change the front oil seal, but it won't be seen as I have remodelled another guard. The project is coming on well now, have had the prop out and in, and now I have the measurement, it is ordered. Tomorrow will get the oil filter relocation kit mounted and measure up for the hoses. Once that is done I will begin the water/meth installation. That only leaves the HHO, and then it can go on the rollers. Edited July 11, 2010 by David P (see edit history) Quote Link to comment Share on other sites More sharing options...
Morpheus Posted July 11, 2010 Share Posted July 11, 2010 Cool, I'll send you the racing belt first, incase the existing one breaks on the dyno from all that ultra-rapid gear shifting! Hehe! Quote Link to comment Share on other sites More sharing options...
Morpheus Posted July 11, 2010 Share Posted July 11, 2010 (edited) Spooky! You just replied to my post before I sent it! Obviously from the previous post. Timing was freaky though! That guard is a bit 'unorthodox' isn't it? Looks great but really should have full enclosure, just incase, with Perspex or Lexan windows, (very thin and practically indestructible), as any contaminants will obviously wear the gears and belt and dust could/will get into the tensioner bearing etc. Edited July 11, 2010 by Morpheus (see edit history) Quote Link to comment Share on other sites More sharing options...
David P Posted July 11, 2010 Author Share Posted July 11, 2010 That's an apt and 'spooky' word too. The cam gears are made by 'Unorthodox' Racing. Wanted to cover up the cam belt, yet leave the gears accessible. Looks good too. Quote Link to comment Share on other sites More sharing options...
Morpheus Posted July 11, 2010 Share Posted July 11, 2010 That's an apt and 'spooky' word too. The cam gears are made by 'Unorthodox' Racing. Wanted to cover up the cam belt, yet leave the gears accessible. Looks good too. Unfortunately not that spooky, as I knew from reading your build specs. and reCOGnised them from their website! Quote Link to comment Share on other sites More sharing options...
David P Posted July 11, 2010 Author Share Posted July 11, 2010 Ooop's, and it was wrapped with inverted comma's too. I really must wear my glasses whilst pressing buttons. I will send you the trans upgrade kit when I get your address. Quote Link to comment Share on other sites More sharing options...
Morpheus Posted July 12, 2010 Share Posted July 12, 2010 Ooop's, and it was wrapped with inverted comma's too. I really must wear my glasses whilst pressing buttons. I will send you the trans upgrade kit when I get your address. Ok, I'll email you David. I was searching for a clear top timing cover myself but never found one. There was one company I think I saw in someone's build specs. somewhere but forgot who they were. Anyone? Think it was a Japanesey sounding name. Could be a sideline one day if I can manage to make one, maybe vacformed 2mm Lexan. I bought a couple of VW Beetle RC Monster Truck shells off ebay from a bloke who makes them every now and then. He'll do it. Failing all that, I'll machine them from solid on my benchtop milling machine if I ever get round to converting it to CNC, then polish them up. Don't hold your breath though, eh! Quote Link to comment Share on other sites More sharing options...
David P Posted July 12, 2010 Author Share Posted July 12, 2010 They are available, saw them for sale somewhere, but silly money. Quote Link to comment Share on other sites More sharing options...
Morpheus Posted July 12, 2010 Share Posted July 12, 2010 They are available, saw them for sale somewhere, but silly money. That's ok, I'm used to paying silly money! Quote Link to comment Share on other sites More sharing options...
David P Posted July 19, 2010 Author Share Posted July 19, 2010 Andy, Here are the pics of the column loom I promised. Hope you can see what you need to. Quote Link to comment Share on other sites More sharing options...
trinitom Posted July 19, 2010 Share Posted July 19, 2010 (edited) is the power steering reservoir connected to the water pipe? Edited July 19, 2010 by trinitom (see edit history) Quote Link to comment Share on other sites More sharing options...
Andy-No-Knee Posted July 19, 2010 Share Posted July 19, 2010 Cheers Dave. Quote Link to comment Share on other sites More sharing options...
acandales001 Posted February 14, 2016 Share Posted February 14, 2016 Dave, New member here about to pickup a 1995 MKIV N/A->TT swamp using the a340e in a few days. I'm looking to install the SupraStick and was wondering if you ever created a write-up about it that I could reference. Let me know, and thanks in advance! Tony Quote Link to comment Share on other sites More sharing options...
David P Posted February 17, 2016 Author Share Posted February 17, 2016 Tony, Excuse me for a slow reply, I have been flat out fighting with my spine disease for a few days. The links in my signature will take you to a comprehensive "write up" in the Transmission Group and/or to the Latent Solutions installation wiring diagram via the Group or from the Transmission section in "my garage" and also, Suprastick install and Hybrid transmission install in my build threads. I have tried by p.m. to answer a few of your questions, nevertheless, should all of the above writing and pretty pictures not convey it, I can't see the point of me writing it again? At this juncture of confuddlement, the way forwards is to contact me and interrogate me by talking in old money and connect the dots that yet haven't. Quote Link to comment Share on other sites More sharing options...
gaijin Posted February 17, 2016 Share Posted February 17, 2016 Nice work Clear cam covers on e bay From China,but look ok and under £20 Might be worth a punt to see what they're like Good luck Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.