aman00123 Posted June 27, 2010 Share Posted June 27, 2010 I know this is annoying but I was wondering if someone could possibly help me by showing what these wheels would like like on my car? http://jm-imports.co.uk/carimages/toyota/2009/supra20/bb1.jpg http://jm-imports.co.uk/carimages/toyota/2009/supra20/bb6.jpg Any help much appreciated Link to comment Share on other sites More sharing options...
Jamesy Posted June 27, 2010 Share Posted June 27, 2010 cant do photoshop but they'd look really good. what are they Link to comment Share on other sites More sharing options...
Scott Posted June 27, 2010 Share Posted June 27, 2010 I can't help with PhotoShop at the moment but I can tell you they will be rather tasty. Link to comment Share on other sites More sharing options...
aman00123 Posted June 27, 2010 Author Share Posted June 27, 2010 Yup, just wasn't sure how the black would turn out.... They are Racing Hart's and pretty rare Lovely rims, 5.5" dish on the rears Also muchos moneys but would fit beautifully under my new overfenders Just trying to convince myself to spend the money on them Link to comment Share on other sites More sharing options...
foggy147 Posted June 27, 2010 Share Posted June 27, 2010 They are stunning wheels, definately go for it. Nice car too Link to comment Share on other sites More sharing options...
hmoreta Posted June 27, 2010 Share Posted June 27, 2010 No photoshop in this case mate...those wheels very nice!!!! Link to comment Share on other sites More sharing options...
aman00123 Posted June 27, 2010 Author Share Posted June 27, 2010 If only I got £100 for every person that says that! Well my current wheels will be going up then, if I can secure these wheels.... Link to comment Share on other sites More sharing options...
marcAB10 Posted June 27, 2010 Share Posted June 27, 2010 Epic want!!!! Link to comment Share on other sites More sharing options...
JamesC Posted June 28, 2010 Share Posted June 28, 2010 They look nice Link to comment Share on other sites More sharing options...
JamesC Posted June 28, 2010 Share Posted June 28, 2010 Ok, ok Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted June 28, 2010 Share Posted June 28, 2010 i prefer whats on yours already, but nice wheels mate Link to comment Share on other sites More sharing options...
aman00123 Posted June 28, 2010 Author Share Posted June 28, 2010 Thank you for that James Do look good, I'm going to either need wider wheels or spacer my current ones (by 50mm each side) mitchell, hence me looking at these as they will fit my new overfenders perfectly. Oh and did you see the huuuge dish on the rears Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted June 28, 2010 Share Posted June 28, 2010 oh i got you mate. are you going with the veilside overfender kit? im being tempted by that myself but spacers i guess are a bodge way of doing it. Link to comment Share on other sites More sharing options...
a98pmalcolm Posted June 28, 2010 Share Posted June 28, 2010 if they were bigger i think they would look awsome Link to comment Share on other sites More sharing options...
Scott Posted June 28, 2010 Share Posted June 28, 2010 if they were bigger i think they would look awsome What size are they? How do you know how big they are? Link to comment Share on other sites More sharing options...
aman00123 Posted June 28, 2010 Author Share Posted June 28, 2010 Hehe, they are huge mate, 5.5" dish on the rears, 18x12.5 and fronts are 18x10 with a 3.5" dish oh and with some crazy offsets! I'm going for a replica overfender set, which are 60mm wider per arch, at the rear! Link to comment Share on other sites More sharing options...
aman00123 Posted June 28, 2010 Author Share Posted June 28, 2010 Just a quick question, I think these will fit but just wondering if there will be any rubbing at front on full lock? 114.3 x 5, high disk Front: 18x10J et12 Rear: 18x12.5J et-20 (minus 20) Link to comment Share on other sites More sharing options...
Mas Posted June 29, 2010 Share Posted June 29, 2010 Just a quick question, I think these will fit but just wondering if there will be any rubbing at front on full lock? 114.3 x 5, high disk Front: 18x10J et12 Rear: 18x12.5J et-20 (minus 20) You'll be fine mate, i have 255 in front and the Teins are as low as they drop too, never had problems. looking at ET12 though not sure if thats gonna change things abit Link to comment Share on other sites More sharing options...
aman00123 Posted June 29, 2010 Author Share Posted June 29, 2010 As long as they don't rub, they should clear brakes as they are "high disk" and cleared huuuge brakes on an rx7 so should be alright on the supe with UK brakes..... How do you find 255's at the front? How does it affect your performance? Link to comment Share on other sites More sharing options...
Scott Posted June 29, 2010 Share Posted June 29, 2010 Those offsets are just insane. I think you might struggle on the rear nevermind on the front. ET12's on the front will stick out a mile. The overfenders on the front don't stick out any further than stock. Link to comment Share on other sites More sharing options...
aman00123 Posted June 29, 2010 Author Share Posted June 29, 2010 According to online calculator it works out to 43mm on front and 93mm on rear, with a narrower tyre do you not think I could get away with it? Have heard of a 18x13 et-04 working on the rears before, with a narrower tyre.... Link to comment Share on other sites More sharing options...
Scott Posted June 29, 2010 Share Posted June 29, 2010 How does it sound to you? Have you looked at 43mm and 93mm on a rule? I have 19x10 ET20 on a 10mm spacer, this basically makes them 19x10 ET10. The fit is absolutey perfect for the standard size overfenders. The larger ones are 30mm further out? This would mean 18x12 ET10's would be a perfect fit or 10x12.5 ET15s. Going any further than that is just insane IMO. 18x12.5 ET-20 is going to be 35mm further out than you need. For the fronts a little over the stock offset is fine on a 9" wheel. I have 19x9 ET30 (might be 35) and they line up perfect with no rubbing and no arch work. 18x10 ET12 is going to stick out 30mm further than mine which again... its nuts. I'll be shocked if the car doesn't look like a beach buggy with them on. Link to comment Share on other sites More sharing options...
Mas Posted June 29, 2010 Share Posted June 29, 2010 How do you find 255's at the front? How does it affect your performance? Are you going to race your car all the time and do loads of corners, well I dont and it doesnt effect my performance at all comparing it with the stock size tyres I had before tbh. Link to comment Share on other sites More sharing options...
aman00123 Posted June 29, 2010 Author Share Posted June 29, 2010 How does it sound to you? Have you looked at 43mm and 93mm on a rule? I have 19x10 ET20 on a 10mm spacer, this basically makes them 19x10 ET10. The fit is absolutey perfect for the standard size overfenders. The larger ones are 30mm further out? This would mean 18x12 ET10's would be a perfect fit or 10x12.5 ET15s. Going any further than that is just insane IMO. 18x12.5 ET-20 is going to be 35mm further out than you need. For the fronts a little over the stock offset is fine on a 9" wheel. I have 19x9 ET30 (might be 35) and they line up perfect with no rubbing and no arch work. 18x10 ET12 is going to stick out 30mm further than mine which again... its nuts. I'll be shocked if the car doesn't look like a beach buggy with them on. Hmm, cheers for that bud guess they stick out more than i thought Looks like I'm back to the drawing board then, shame they were good price too Link to comment Share on other sites More sharing options...
Scott Posted June 29, 2010 Share Posted June 29, 2010 Can you try them on first? It might not look as bad in the flesh as it does in my head. I wouldn't go spending money on them without knowing though. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now