rxv8 Posted June 20, 2010 Share Posted June 20, 2010 (edited) fixed now,cheers... Edited June 22, 2010 by rxv8 (see edit history) Quote Link to comment Share on other sites More sharing options...
barneybrendan Posted June 20, 2010 Share Posted June 20, 2010 did you get it with the pulley damage or did you have it running. and you wont hear the pump we tried that when mine wouldnt fire up.post up pick of cap. Quote Link to comment Share on other sites More sharing options...
JODY T Posted June 20, 2010 Share Posted June 20, 2010 the centre bit on the dissy cap shouldnt be flush with the plastic, it should be a good 5mm sticking out and you should be able to push it into the plastic and it should pop back out cos its on a spring, maybe its just stuck??? Quote Link to comment Share on other sites More sharing options...
rxv8 Posted June 21, 2010 Author Share Posted June 21, 2010 cant get my n/a started...i have checked what i can,i.e new plugs,new cap and rotor arm,have a spark and fuel...but turns over fast but just will not fire does not even attempt to....what else could it be to do this... Quote Link to comment Share on other sites More sharing options...
rxv8 Posted June 22, 2010 Author Share Posted June 22, 2010 anyone help??? Quote Link to comment Share on other sites More sharing options...
barneybrendan Posted June 22, 2010 Share Posted June 22, 2010 i had the same thing on the first engine .check your timming.my distributor was out.get it to tdc and check where rotar arm is pointing. Quote Link to comment Share on other sites More sharing options...
Guest any4any Posted June 22, 2010 Share Posted June 22, 2010 check and plug crank and cam sensor socket then check other sensors G.luck Quote Link to comment Share on other sites More sharing options...
barneybrendan Posted June 22, 2010 Share Posted June 22, 2010 check and plug crank and cam sensor socket then check other sensors G.luck na dont have crank sensor. Quote Link to comment Share on other sites More sharing options...
Smallshinyant Posted June 22, 2010 Share Posted June 22, 2010 have you got an alarm system that may be playing up? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.