Problem / mis-fire / cam seal change / need help

[supra steveo]

I've just done a cam seal change and I seem to , in the progress, aquired a bit of a mis fire problem I've took all the ht leads out and gave them a bit of a clean, it seemed to run ok for 5 mins then went back to the mis fire problem

 

Any ideas ?

Edited June 14, 2010 by supra steveo (see edit history)

[Jurgen-Jm-Imports]

what have you excatly done mate ??

 

what did you remove

 

maybe a ht lead not connected properly or loose ??

[supra steveo]

Just changed the cam seals , took the intake off and cam covers to replace the seals, I've just took it apart again to check everything and it's still misfiring

[Jurgen-Jm-Imports]

th problem has only happen when you have removed things so my guess is you have missed or moved something..

[ADD]

Maybe the leads to the coil pacs have become brittle and you disturbing them has caused them to fracture?? coil pack connectors duff?

[supra steveo]

sorted number 6 spark plug was uber loose it wasnt finger loose but put a socket on it and it moved a hell of alot removed cleaned replace ................ purring like a kitten again just need to get the right deep socket in my tool kit now had to borrow a massey's deep socket set, what size socket does the spark plugs take

Edited June 14, 2010 by supra steveo (see edit history)