Smellywelshman Posted June 9, 2010 Share Posted June 9, 2010 Bonjour! Bit of a long shot, but has any body changed the above? The problem I've got is with a clamp which holds the rear handbrake cable to the chassis about half way along the cable. This clamp is bolted to the inside face of the chassis with a 10mm bolt (into what I can onlyl assume is a captive nut on the inside of the chassis box section) just infront of the off side rear wheel. It's near impossible to get a 12mm ring spanner, and totally impossible to get a socket on to the bugger as the fuel tank is only 50mm (ish) away from it. I could do without dropping the fuel tank to get at it to be honest. Have any of you had any experience of this? Is there any trick to getting this bolt out without uber spannering? As always, any help is greatly appreciated! Rob... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now