Jump to content
The mkiv Supra Owners Club

Jamesy's Billet 6765H Single Conversion ...!


Jamesy

Recommended Posts

  • Replies 1.2k
  • Created
  • Last Reply

Top Posters In This Topic

Yeah Orange front bumper and silver for the rest!!

 

The GReddy plenum came out a treat - the cams covers are there now as well as the front strut brace that was previously blue for the same treatment....

 

lol i was only kidding, going to look awesome when its finished mate i bet you cant wait :D

Link to comment
Share on other sites

Won't need cooling fan on the gearbox coolers because of the mounting position. :)

 

you sure about that mate ! i have two coolers on mine mate and one of them is in the left hand side of my do-luck has a fan on it and mine still run's hot every now and again and i only have a 3200 stall the 3800 will generate alot more heat when ragging it .

 

Are you fitting a temp gauge?

Link to comment
Share on other sites

you sure about that mate ! i have two coolers on mine mate and one of them is in the left hand side of my do-luck has a fan on it and mine still run's hot every now and again and i only have a 3200 stall the 3800 will generate alot more heat when ragging it .

 

Are you fitting a temp gauge?

 

If you mount them to the side of the bumper you will have no cooling effect when the car is stationary which is when you would need a fan. When the car is moving there is enough air passing through to cool it.

 

The reason for not adding a fan in this position is that the viscous fan is pulling a lot of air through it while stationary.

 

No gauge, he has enough to worry about just looking where he is going. :)

Link to comment
Share on other sites

If you mount them to the side of the bumper you will have no cooling effect when the car is stationary which is when you would need a fan. When the car is moving there is enough air passing through to cool it.

 

The reason for not adding a fan in this position is that the viscous fan is pulling a lot of air through it while stationary.

 

No gauge, he has enough to worry about just looking where he is going. :)

 

Yup, like his bank account getting drained, ;)

Link to comment
Share on other sites

Sorry if the question is already answered somewhere in the thread, but who is mapping your HKS F-con V pro gold m8?

 

Im sure its RyanG dude, 2bartuning. :D

 

 

Yep thats the plan - Lee and Ryan work a lot together so its handy!!

 

however.....as Ryan is selfishly buggering off on hols for weeks we're on a bit of a tight timeframe to make it ready in time - to be honest i dont think it will be so we may have to look at Ryans business partner or TDi to map it. :)

Link to comment
Share on other sites

Yep thats the plan - Lee and Ryan work a lot together so its handy!!

 

however.....as Ryan is selfishly buggering off on hols for weeks we're on a bit of a tight timeframe to make it ready in time - to be honest i dont think it will be so we may have to look at Ryans business partner or TDi to map it. :)

 

I thought it required a special licens to map the HKS f-con, which I heard Ryan didnt have, but maybe he have now..

Link to comment
Share on other sites

Yep thats the plan - Lee and Ryan work a lot together so its handy!!

 

however.....as Ryan is selfishly buggering off on hols for weeks we're on a bit of a tight timeframe to make it ready in time - to be honest i dont think it will be so we may have to look at Ryans business partner or TDi to map it. :)

 

15 days!! And only half of it is a holiday :) I deserve one after answering all your questions at the start :D

 

If im not around get Sam @ TDI to do it and say Ryan said you would do it for a good price :eyebrows:

 

Ryan

Link to comment
Share on other sites

15 days!! And only half of it is a holiday :) I deserve one after answering all your questions at the start :D

 

If im not around get Sam @ TDI to do it and say Ryan said you would do it for a good price :eyebrows:

 

Ryan

 

 

lol :D

 

ok cheers mate we'll see how we get on and go to Sam if you're away on your "half" a holiday!!

Edited by Jamesy (see edit history)
Link to comment
Share on other sites

:( sold my alloys yesterday so the hunt is on for replacements that are a bit wider to help with traction!!

 

Found one lovely set but waiting to hear if it'll go ahead with the seller.....will get some pics of them as soon as i know whats happening! :D

 

 

Lee's working on the manifold as it wasn't clocked and the H Cover was touching it - some fabrication needed!!!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.