Guest Suprastar2009 Posted June 2, 2010 Share Posted June 2, 2010 Hi guys , I've just got in from attempting to change the hose that goes from the side of the induction kit to the side of the engine, I've managed to attach the end to the side of the induction kit fine including the little clip, however I've come a cropper on the other end I've managed to get the hose on but can't get the clip on it was really hard to get on, I attempted to put the standard hose back on but that was impossible I'm worried now will the hose I've put in come off? What should I do? Any help greatly appreciated Quote Link to comment Share on other sites More sharing options...
heckler Posted June 2, 2010 Share Posted June 2, 2010 that is a breather hose should be fine without a clip. those clips can be a pain in the ass - you need a good set of pliars - or an alternative is jublee clips... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.