hodge Posted June 1, 2010 Share Posted June 1, 2010 Hi guys I'm going to get sone braided line for the clutch tomorrow, so I can Get this part of my project sorted and done. Would someone give me a quick how-to fir bleeding the clutch off please. Is it the sane as brakes, push pedal open bleed nipple close bleed nipple slowly lift pedal repeat until all the air is out. thanks John Quote Link to comment Share on other sites More sharing options...
JODY T Posted June 1, 2010 Share Posted June 1, 2010 Yeah it works the same, I have known good slave cylinder die during the bleed process though where by they just dont bleed atall.. PITA So try not to let it go totally dry. Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted June 1, 2010 Share Posted June 1, 2010 NO! You OPEN THE BLEED NIPPLE FIRST, then push the pedal fairly slowly to the floor, c;ose the nipple, slowly release the pedal, re open the nipple, and cycle through the above sequence until clean, air free fluid emerges. Building pressure then opening the nipple is wrong. Quote Link to comment Share on other sites More sharing options...
hodge Posted June 1, 2010 Author Share Posted June 1, 2010 OK cheers Thanks for the help. Ill sort that today. Thanks again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.