Jellybean Posted May 31, 2010 Share Posted May 31, 2010 The Light Cluster for the ABS and Oil cluster has a loose connection, they work fine if I press the wire in but as soon as I drive they wont work again till I press on the loom again, Whats the best way to fix this? And out of curiousty what is the DB level with just second CAT in on TT? Link to comment Share on other sites More sharing options...
Suprab1 Posted May 31, 2010 Share Posted May 31, 2010 The Light Cluster for the ABS and Oil cluster has a loose connection, they work fine if I press the wire in but as soon as I drive they wont work again till I press on the loom again, Whats the best way to fix this? And out of curiousty what is the DB level with just second CAT in on TT? Hi mate, the same thing was happening to me & it turned out to be dry solder. Just remove the light cluster open it up & resolder the joints & it will be perfect again. Link to comment Share on other sites More sharing options...
Jellybean Posted May 31, 2010 Author Share Posted May 31, 2010 Hi mate, the same thing was happening to me & it turned out to be dry solder. Just remove the light cluster open it up & resolder the joints & it will be perfect again. cool thanks Link to comment Share on other sites More sharing options...
Suprab1 Posted May 31, 2010 Share Posted May 31, 2010 (edited) No problem mate. If you are buying a solder iron get the 1 with the pointed tip not the flat screwdriver type. I got the flat 1 but it made it very awkward to get into the solder points. Here's a guide for the DB levels, hope it helps. http://www.mkivsupra.net/vbb/showthread.php?t=217156 Edited May 31, 2010 by Suprab1 (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now