monsween Posted May 29, 2010 Share Posted May 29, 2010 For installing an aftermarket BOV I found that its a 20mm bung i need but not sure where to get it. B&Q? Somewhere like that. Not able to get to the shops to check, want to know for when i get back so i can go get it or buy it online. Cheers Link to comment Share on other sites More sharing options...
dwayne Posted May 29, 2010 Share Posted May 29, 2010 i used the rubber end from a walking stick with a jubilee clip as a temp measure (that was over a year ago and its still on there) Link to comment Share on other sites More sharing options...
Lude Posted May 29, 2010 Share Posted May 29, 2010 i used the rubber end from a walking stick with a jubilee clip as a temp measure (that was over a year ago and its still on there) same with me Link to comment Share on other sites More sharing options...
monsween Posted May 29, 2010 Author Share Posted May 29, 2010 I seen that on my searches but was looking for something a little better than that. Ie something that the heat wont affect. Cheers Link to comment Share on other sites More sharing options...
Terminator Posted May 29, 2010 Share Posted May 29, 2010 When I fitted my first Bov, had the same problem, short section of metal bar did the trick. Link to comment Share on other sites More sharing options...
monsween Posted May 29, 2010 Author Share Posted May 29, 2010 Didnt think of that, trip to b&q might do the trick Link to comment Share on other sites More sharing options...
Scott Posted May 29, 2010 Share Posted May 29, 2010 19mm bud Link to comment Share on other sites More sharing options...
Lbm Posted May 29, 2010 Share Posted May 29, 2010 Moved from Tech. Link to comment Share on other sites More sharing options...
monsween Posted May 29, 2010 Author Share Posted May 29, 2010 Sorry thought it'd be more techy than chatty Cheers scott, any luck with the bung or has that one been sold Link to comment Share on other sites More sharing options...
SupraD06 Posted May 29, 2010 Share Posted May 29, 2010 Got the very thing you need mate, just been out and found the proper bung used for blocking that pipe off. I bought a couple when fitting my B.O.V, Pm your address and its all yours Link to comment Share on other sites More sharing options...
monsween Posted May 29, 2010 Author Share Posted May 29, 2010 You my friend are a legend. Link to comment Share on other sites More sharing options...
Scott Posted May 29, 2010 Share Posted May 29, 2010 ^^That's the one you need mate Link to comment Share on other sites More sharing options...
Nic Posted May 29, 2010 Share Posted May 29, 2010 GReddy do them http://www.trust-power.com/14others/g_cap.html Link to comment Share on other sites More sharing options...
monsween Posted May 29, 2010 Author Share Posted May 29, 2010 Thanks for the link Nic, SupraD06 came through for me and is sending out the metal one Link to comment Share on other sites More sharing options...
monsween Posted June 27, 2010 Author Share Posted June 27, 2010 Received the bung mate. Great club spirit. +1 Karma Link to comment Share on other sites More sharing options...
Jellybean Posted July 5, 2010 Share Posted July 5, 2010 In the same pickle, tried the Motor factors over here useless told to go to toyota , ha ha Any suggestions? Link to comment Share on other sites More sharing options...
shaz2010 Posted December 23, 2013 Share Posted December 23, 2013 Anyone no where to get one of these bungs for replacing the stock bov to aftermarket? Link to comment Share on other sites More sharing options...
Nic Posted December 23, 2013 Share Posted December 23, 2013 (edited) Anyone no where to get one of these bungs for replacing the stock bov to aftermarket? http://www.ebay.co.uk/sch/i.html?_sacat=0&_from=R40&_nkw=Silicon+bung+blank&_sac=1#seeAllAnchorLink Edited December 23, 2013 by Nic (see edit history) Link to comment Share on other sites More sharing options...
Jellybean Posted December 23, 2013 Share Posted December 23, 2013 What happened to the walking stick bungs we use to use lol http://m.ebay.ie/itm/260999596168?nav=SEARCH&sbk=1 Link to comment Share on other sites More sharing options...
shaz2010 Posted December 23, 2013 Share Posted December 23, 2013 Cheers lads walking stick end haha good idea might have one in the shed. It needs to be 19mm is that right? Link to comment Share on other sites More sharing options...
Jellybean Posted December 23, 2013 Share Posted December 23, 2013 Think its 19mm, back in my day we didn't have these highly sophisticated silicon bungs lol I have two walking stick rubber bungs in place about six years now Link to comment Share on other sites More sharing options...
shaz2010 Posted December 24, 2013 Share Posted December 24, 2013 Just had a look at your engine bay haha I've seen them on there 6 years good enough proof that they work . Cheers mate Link to comment Share on other sites More sharing options...
SupraD06 Posted December 24, 2013 Share Posted December 24, 2013 If you want a metal one like the one i posted, here is the link http://www.ebay.co.uk/itm/Metal-Aluminium-Blanking-Plug-Bung-Silicone-Hose-Dump-Valve-Bov-End-Cap-solid-/221339650950?pt=UK_Car_Parts_Vehicles_Automobila_ET&var=&hash=item3388df0b86 Link to comment Share on other sites More sharing options...
shaz2010 Posted December 24, 2013 Share Posted December 24, 2013 If you want a metal one like the one i posted, here is the link http://www.ebay.co.uk/itm/Metal-Aluminium-Blanking-Plug-Bung-Silicone-Hose-Dump-Valve-Bov-End-Cap-solid-/221339650950?pt=UK_Car_Parts_Vehicles_Automobila_ET&var=&hash=item3388df0b86 Thanks all sorted Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now