weskereric Posted May 23, 2010 Share Posted May 23, 2010 Yesterday, I was cleaning the cars of all sound wires that I didn't use and I cut by accident a wire from the fpr that goes in the car or may be in the boot. They are 2 wires on the fpr, one goes to the earth and the second one I cut. Could you help me telling me where does it go ? Link to comment Share on other sites More sharing options...
Matt Harwood Posted May 23, 2010 Share Posted May 23, 2010 There aren't any wires on the FPR, unless you're talking about an aftermarket one with a FP gauge perhaps? Link to comment Share on other sites More sharing options...
weskereric Posted May 23, 2010 Author Share Posted May 23, 2010 It's what I was looking for, there is something attached to my fpr but I didn't see any jauge so may be a sensor, I'll get a picture in 15 minutes Link to comment Share on other sites More sharing options...
Wez Posted May 23, 2010 Share Posted May 23, 2010 Post a pic Link to comment Share on other sites More sharing options...
weskereric Posted May 23, 2010 Author Share Posted May 23, 2010 This is the pic : http://lh6.ggpht.com/_ao5cKlSAKw4/S_lxcqeyKQI/AAAAAAAABBU/GRDjaQc6SoM/s640/DSC03208.JPG So what is it ? and where do I have to connect the wire ? Link to comment Share on other sites More sharing options...
Homer Posted May 23, 2010 Share Posted May 23, 2010 Looks like a (rather large) fuel pressure sensor. Are you sure you don't have a fuel pressure gauge anywhere? What ECU is it running? Is the red wire the ones that's cut? Most likely the wire will run into the passenger footwell... Link to comment Share on other sites More sharing options...
weskereric Posted May 23, 2010 Author Share Posted May 23, 2010 I've just contacted the previous owner, he just told me that was a sensor for a previous fuel jauge, so I just have to disconnect the wires and that's it. I'm saved My ECU is an AEM and doesn't use this sensor Link to comment Share on other sites More sharing options...
Homer Posted May 23, 2010 Share Posted May 23, 2010 Well that explains it then BTW it's spelled gauge, not jauge /English lesson Link to comment Share on other sites More sharing options...
weskereric Posted May 23, 2010 Author Share Posted May 23, 2010 Thanks for the lesson, jauge in French is gauge so now you know one more word in French Link to comment Share on other sites More sharing options...
TLicense Posted May 23, 2010 Share Posted May 23, 2010 I've just contacted the previous owner, he just told me that was a sensor for a previous fuel jauge, so I just have to disconnect the wires and that's it. I'm saved My ECU is an AEM and doesn't use this sensor There's no reason why you couldn't connect it up to the AEM. Even if you don't use it for anything, you'll be able to log it. Link to comment Share on other sites More sharing options...
weskereric Posted May 23, 2010 Author Share Posted May 23, 2010 Yes probably but I was just worried about a wire disconnected from the fpr Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now