RobD Posted May 18, 2010 Share Posted May 18, 2010 I've got a set of LS400 calipers and shims, pins and the bolts for the calipers (new) also. To finish this kit so you can install them you'd need pads and disc's and ideally a seal kit to refurb the calipers! They've cleaned up well but at the moment needing some money to pay off some things! Offers! Will get pics tomorrow, pick up prefered! Link to comment Share on other sites More sharing options...
RobD Posted May 18, 2010 Author Share Posted May 18, 2010 Forgot to say, for anyone not knowing these calipers are a 4 pot caliper! They are a cheaper way of getting very good brake setup for less cost than a set of uk specs! Link to comment Share on other sites More sharing options...
mark newman Posted May 18, 2010 Share Posted May 18, 2010 are these a straight swap. eg fitting with no new bracket to be made. Link to comment Share on other sites More sharing options...
RobD Posted May 18, 2010 Author Share Posted May 18, 2010 They need a little bit filing of, but this takes 20 seconds! You can tell what bit needs filing when you offer the caliper up to the hub i've been told Link to comment Share on other sites More sharing options...
RobD Posted May 18, 2010 Author Share Posted May 18, 2010 http://www.mkivsupra.net/vbb/showthread.php?t=185889&highlight=ls400+brakes Just found this Link to comment Share on other sites More sharing options...
Kev_A Posted May 19, 2010 Share Posted May 19, 2010 Very easy to fit these and are a substantial upgrade over stock J-specs!, very happy with mine Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted May 19, 2010 Share Posted May 19, 2010 These are easy as pie to fit. The bit that needs filed will become apparent as soon as you try and fit them and as they are alloy, it won't take long to shape them down. Also for pad selection I was speaking to CW a couple of weeks ago (sorry for not getting back to you chris!) and he can supply his fast road pad in this fitment for the same price as his UK fast road pad. These are very good value as an upgrade to jspecs, and the bolts you need are only a couple of quid from toyota. Link to comment Share on other sites More sharing options...
RobD Posted May 19, 2010 Author Share Posted May 19, 2010 I have the bolts needed to fit these! I'm getting alot of PM's asking how much i'd take! I paid 200 for them so would like to see that back! Can arrange postage but would need to check to see how much it would cost! Link to comment Share on other sites More sharing options...
Guest Banners Posted May 19, 2010 Share Posted May 19, 2010 Rob, you have a PM Newbie Banners Link to comment Share on other sites More sharing options...
Abz Posted May 19, 2010 Share Posted May 19, 2010 Can I have them as a Wedding present? Link to comment Share on other sites More sharing options...
dr_jekyll Posted May 19, 2010 Share Posted May 19, 2010 these are also a fair bit lighter than the uk calipers Link to comment Share on other sites More sharing options...
RobD Posted May 19, 2010 Author Share Posted May 19, 2010 Sold to banners! Link to comment Share on other sites More sharing options...
Recommended Posts