Jump to content
The mkiv Supra Owners Club

Large scale petrol models


Aero-M

Recommended Posts

******** MORE CARS IN POST SIX AND POST 22 UPDATED WITH 2 MORE TODAY 6/6/10 ***********************

 

I'm having a clear out so Up for grabs are these petrol models

 

Fg monster beetle:

 

This is a proper factory monster beetle not a conversion, It is fitted with a Zenoh 26cc petrol engine, Hitec hs-645 mg throttle servo and Hitec 5745 mg steering servo, This has not been used more than 5 times from new, It also has new Spektrum Dx3s radio gear with telemetry. Thanks to my mate the shell got a bit bashed when he borrowed it so it is perfectly useable but wants a new one to be perfect, You can get a fiberglass one of ebay for £30 or buy a genuine fg one for about £80. Picture next to the 1/10th scale ferrari to show how big it is. I would like £625 for this. The radio gear and new servos cost £240 alone and have only been used once as i changed the standard rubbish that it came with. so about £1100 to buy new.

 

image

image

image

image

image

image

 

 

Next is a HPI Baja 5b buggy, This again hasn't had a lot of use. It has had £100's of upgrades, including a 29cc conversion, sports exhaust, One of the best upgrades you can do to these is fit them with RPM front/rear upper and lower a-arms, full metal gear set, lots of spare parts also included, standard 23cc engine parts also. It has an upgraded hitec hs 5745 mg steering servo as the standard ones are not very good, standard radio gear. £550

 

image

image

image

image

 

Fg sportsline short wheelbase porsche gt2.

 

This is by no means in excleent condition, but is perfect for taking down to car parks/industrial estates for a bash. The shell is in poor condition despite me spending £60 on painting it and repairing some of the bigger cracks with flexy tough stuff. decent servo's again with this, throttle servo is a hitec hs- 715bb and the steering is hitec hs- 5745 mg. This is fitted with an fg solo 23cc petrol engine, I have put a new metal pinion gear on as the old one had e few dodgy cogs, this is rather quick 60-70 mph, bear in mind the shear size of this that makes it seem even quicker. In the picture the bumper isn't bolted on. I also have the genuine fg scale pack for this car (door mirrors, door handles and wiper blades). Exhaust is a fg race silencer with a few "tuning dents" and custom made pipework to extend it to the back of the car. £325 no radio gear.

 

image

image

image

image

image

image

image

image

image

 

 

 

MOre cars and pics in post #6

Link to comment
Share on other sites

26cc engine?? how fast does that go?

 

They are quick, a 1/10th of similar speed just isn't the same as having one of these. The speed just better. Will wheelie quite nicely to.

 

O.o a TT drift car, cant wait to see pics of that!

 

Will update with pics of that soon, ran out of time last night.

 

That Beetles huge! Does it need tax and MOT? Lol

 

If labour had of stayed in quite possibly.

Link to comment
Share on other sites

Tamiya tt-01, This started out as a standard car which i used for touring car racing, I then got a better touring car and converted this to a drift car. Fully ballraced, oil filled adjustable suspension, alloy prop, vega flux 27t motor, motor cooling fin and fan, drift wheels, etc. This has a futaba 40mhz radio set with it. £150. I will also include another vega flux motor and also a team orion 27t motor. Wheel pictured are racing wheels fitted with takeoff cs 22 tyres and not included with the car.

 

 

image

image

image

image

image

image

image

 

 

Team associated rc10 t4 rs race spec.

 

Fitted with 40mhz radio gear, 17 t motor and a rocket max speed controler, this is a really capable 1/10th scale off road, being the race spec it as the name suggests more suited to racing than the standard rc10 t4. £150

 

image

image

image

image

 

Schumacher fusion 28

 

This is just the best 1/10th scale touring car you can buy. It is fitted with a 4.5cc pico 7 port race tuned engine that revs to 33,000 rpm, it has had an uprated clutch bell and is capable of speeds 100+mph, fitted with a 3 speed gearbox, You need a good open space to make the most of this car and idealy a very smooth surface, the only way they could get a tyre to handle the speed is to use foam tyres, these get chewed up quickly on rough tarmac. I will fit the car with a new set of wheels and foam tyres bor the new owner. Everything is fully adjustable on this car, fitted with a supra body shell that is used, it also had a roll and scratched the cylinder head and exhaust. £235 as its a bit tatty but the engine has only had 5 tanks of fuel through it so only just run in.

 

image

image

image

image

image

image

image

image

image

Link to comment
Share on other sites

Bump.

 

I also have a thunder tiger ts4-n, single speed nitro car. complete and ready to run. I have just fully serviced it, fitted a new set of wheels and tyres, new 40mhz radio gear, and whoever buys it can have a choice of either- a Bmw 3 series racing shell painted in gold or a Porsche 911 gt3 shell, I will of course paint this any colour for you and cut it all out to fit the chassis if required. both shells are new and uncut. pictures to follow.

Link to comment
Share on other sites

Open to sensible offers on these as I need them gone to get another van.

 

On the FG bettle are the shells changeable between the other FG models? basically could i put the F150 shell on it?

 

Let me know your best price.

Link to comment
Share on other sites

On the FG bettle are the shells changeable between the other FG models? basically could i put the F150 shell on it?

 

Let me know your best price.

 

Hi Jamie, The only difference between the monster beetle and the monster trucks was the trucks had 4 shocks rather than 2 front and back, and also a metal guard at the side, I don't see why the body won't fit but I will ask someone who does know for sure. Give me 1/2 hour.

Link to comment
Share on other sites

Jamie, The monster truck will definatly fit, it will probably need some tinkering with the body posts to get it to fit.

 

I could do a better price for you, but If it is the monster truck you are after it is still going to cost you more to buy mine and convert it if you won't it done properly.

 

You could just put the shell on mine, or If you were to buy a monster truck you would get all the extra suspension, the metal side gaurds and the proper body posts, It would definatly look better to be honest, I know i'm talking myself out of sale but I would rather you knew You get get a better deal for what you want by buying a truck to start with.

Link to comment
Share on other sites

This is probably the best deal I can see on ebay. it's very well priced, looks like he has looked after it. Doesn't say what radio gear/servo's it comes with though.

 

http://cgi.ebay.co.uk/FG-Racing-Monster-Truck-26cc-Goped-Engine-Powered-/320536957881?cmd=ViewItem&pt=UK_ToysGames_RadioControlled_JN&hash=item4aa17dd3b9

 

This one is good as it has some expensive extras but not as clean as the first one.

 

http://cgi.ebay.co.uk/FG-Monster-Truck-4WD-26CC-/170489313268?cmd=ViewItem&pt=UK_ToysGames_RadioControlled_JN&hash=item27b1f477f4

Link to comment
Share on other sites

Cheers, its the first one i have made an offer on, will check it comes with everything.

 

Let me know what he says then. A lot of people seem to buy them, then put cheap gear in. New they come almost ready to run (artr) for about £700-£800 or ready to run (rtr) for £900 but it is with cheap servo's and radio gear.

Link to comment
Share on other sites

Fg marder RACE. Genuine marder race in very good condition, not to be confused with the standard marder. The shell however is USED and as such has splits and marks as expected, perfectly usable and cheaply replacable £30 on ebay.

 

It is fitted with a Zenoah 23cc petrol engine, Hitec 5735 mg steering servo, Hitec hs-625 mg throttle/brake servo. Genuine K&N air filter.

 

Futaba megatech 2pl radio system, I have stripped this right down and cleaned it all up, replaced all the bearing will it was apart, and put it back together as it should be. Tyres also have a lot of tread left. Chassis has the usual scratches to the underneath.

 

Venom rc failsafe fitted and setup

 

£425

 

More photos on request, please see my other items

 

 

image

 

 

 

Thunder Tiger ts4-n nitro race car

 

I have just stripped this all down cleaned and replaced parts as required, It now has new bearings, new pull start, new Bmw m3 bodyshell painted and cut out, really nice set of chrome rims and new tyres, new receiver and transmitter 40mhz. new shocks all round

 

All in all a clean, excellent runner, needs a spoiler to finish and stickers should you wish.

 

£130

 

image

Link to comment
Share on other sites

  • 2 weeks later...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.