JamieP Posted May 12, 2010 Share Posted May 12, 2010 Yep, unopened stock engine. Thats decent power for 1.4bar on stock cams/engine, bung a set of 264's in and i bet you could add 60bhp. Quote Link to comment Share on other sites More sharing options...
Jamesy Posted May 12, 2010 Author Share Posted May 12, 2010 Yup, i did hear they are bringing out a 1.10 divided ar for it, i think that may be a good turbo, whats putting you off using the GT35? Just feel like i have a chance to go bigger now and not have to pull it apart agai in a couple of months, plus with all the options available at the minute i thought it was good to explore what i could o. to begin with it was a basic single build, but as i managed to get some decent injectors, Q45, greddy inlet manifold etc etc i thought maybe i should use them more to their potential Quote Link to comment Share on other sites More sharing options...
Jamesy Posted May 12, 2010 Author Share Posted May 12, 2010 You're right Lee text to say mine made 550bhp and 510lb/ft, will full boost at 4000rpm at 1.5 bar. That's at SRR, in full 'quiet' spec. I'll post up the graph when I get it. nice mate how do you mean quiet spec? are you expecting more from it still? i think your turbo is very similar to this 91/79 model from what i've discovered today Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted May 12, 2010 Share Posted May 12, 2010 Thats decent power for 1.4bar on stock cams/engine, bung a set of 264's in and i bet you could add 60bhp. I'm happy with it... especially getting full boost at the same time as the T61. Plus, you got to love those torque figures For me it wasn't ever about getting high power figures, more having a car which drives well and scares the pants off my passengers. The next stage will probably be a billet wheel, some cams and maybe a built engine (hello 2 bar) but for now I'm just going to drive the tits off it. I should be a good durability tester for the BW turbos. Quote Link to comment Share on other sites More sharing options...
JamieP Posted May 12, 2010 Share Posted May 12, 2010 greddy inlet manifold etc etc Thats a great mod imo, well worth doing on any single car, i have fitted them to both my supras and been very impressed both times. Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted May 12, 2010 Share Posted May 12, 2010 nice mate how do you mean quiet spec? are you expecting more from it still? Cheers - by quiet I mean it's not loud lol. I've got a silenced exhaust and no screamer pipe so I can get onto tracks and race the car this summer. Quote Link to comment Share on other sites More sharing options...
Jamesy Posted May 12, 2010 Author Share Posted May 12, 2010 For me it wasn't ever about getting high power figures, more having a car which drives well and scares the pants off my passengers. nice!! Cheers - by quiet I mean it's not loud lol. I've got a silenced exhaust and no screamer pipe so I can get onto tracks and race the car this summer. oh i see, we wont hear you coming by next time then ... stealth! Quote Link to comment Share on other sites More sharing options...
Jamesy Posted May 12, 2010 Author Share Posted May 12, 2010 Thats a great mod imo, well worth doing on any single car, i have fitted them to both my supras and been very impressed both times. Does this help to lessen the need to get uprated cams then mate? Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted May 12, 2010 Share Posted May 12, 2010 If you're coming to Japfest you'll hear it Quote Link to comment Share on other sites More sharing options...
JamieP Posted May 12, 2010 Share Posted May 12, 2010 Does this help to lessen the need to get uprated cams then mate? Still need cams if you want anything over 550bhp, you might make 650 but it will be strangled at the top end, they come alive with cams after 550bhp from what ive seen. Quote Link to comment Share on other sites More sharing options...
Jamesy Posted May 12, 2010 Author Share Posted May 12, 2010 If you're coming to Japfest you'll hear it Still need cams if you want anything over 550bhp, you might make 650 but it will be strangled at the top end, they come alive with cams after 550bhp from what ive seen. ok cheers mate - Paul still thinks the 91/79 will do 650+ so thats the front runner (should have bought ck's cams when i had the chance!!) - want to get something sorted this week!! Quote Link to comment Share on other sites More sharing options...
Ricky49 Posted May 12, 2010 Share Posted May 12, 2010 Try it before cams for a month or two then if your still not happy get lee to put cams in. Like jamie says it will feel strangled at top end where are you going to do top end not down the A24 to many cameras;). Quote Link to comment Share on other sites More sharing options...
Jamesy Posted May 12, 2010 Author Share Posted May 12, 2010 Try it before cams for a month or two then if your still not happy get lee to put cams in. Like jamie says it will feel strangled at top end where are you going to do top end not down the A24 to many cameras;). cameras everywhere dude, A23, M23, A24. the A272 is good and some roads near me in cuckfield/haywards heath! Quote Link to comment Share on other sites More sharing options...
jevansio Posted May 12, 2010 Share Posted May 12, 2010 MVP can't get any GSC cams until August now either Quote Link to comment Share on other sites More sharing options...
JamieP Posted May 12, 2010 Share Posted May 12, 2010 MVP can't get any GSC cams until August now either Thats a shame, Titan do some nice cams, they also stock Jun cams. http://www.titanmotorsports.com/timo2jzca26l.html Quote Link to comment Share on other sites More sharing options...
Ricky49 Posted May 12, 2010 Share Posted May 12, 2010 Thats a shame, Titan do some nice cams, they also stock Jun cams. http://www.titanmotorsports.com/timo2jzca26l.html Seem a good price. Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted May 12, 2010 Share Posted May 12, 2010 the A272 is good I take that road all the way back to Winchester when I go to see Lee or Jason at Super7. It's amazing if you don't hit traffic Quote Link to comment Share on other sites More sharing options...
Jamesy Posted May 12, 2010 Author Share Posted May 12, 2010 I take that road all the way back to Winchester when I go to see Lee or Jason at Super7. It's amazing if you don't hit traffic oh yes! when i had my skyline i always went to Rising Sun Performance and thats the route i alwasy went!!! Quote Link to comment Share on other sites More sharing options...
Jamesy Posted May 12, 2010 Author Share Posted May 12, 2010 Is your manifold divided? the 91/79 is open but the 88/75 is divided. turns out my manifold is actually open mate - Lee just confirmed - that link i was sent was obviously way off!! Quote Link to comment Share on other sites More sharing options...
JamieP Posted May 12, 2010 Share Posted May 12, 2010 turns out my manifold is actually open mate - Lee just confirmed - that link i was sent was obviously way off!! In that case you are limited to open .ar turbos, 88/75 is out for you and any other divided turbo. Quote Link to comment Share on other sites More sharing options...
Jamesy Posted May 12, 2010 Author Share Posted May 12, 2010 cheers mate - the 91/79 comes with the .88ar for open manifold so still an option. is there a big difference in performance from a divided manifold v an open one? Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted May 12, 2010 Share Posted May 12, 2010 The 88/75 can be had in single scroll, but only with the 0.88AR: http://www.full-race.com/catalog/product_info.php?cPath=214_1167&products_id=1907 Quote Link to comment Share on other sites More sharing options...
Jamesy Posted May 12, 2010 Author Share Posted May 12, 2010 (edited) this BW400 100/95 looks the nuts ..... hmmmm, !! http://www.full-race.com/catalog/product_info.php?cPath=214_1167&products_id=1910 Edited May 12, 2010 by Jamesy (see edit history) Quote Link to comment Share on other sites More sharing options...
Jamesy Posted May 12, 2010 Author Share Posted May 12, 2010 and this is the 91/79 spec i'm also considering: http://www.full-race.com/catalog/product_info.php?cPath=214_1167&products_id=1908 Quote Link to comment Share on other sites More sharing options...
Lee P Posted May 12, 2010 Share Posted May 12, 2010 and this is the 91/79 spec i'm also considering: http://www.full-race.com/catalog/product_info.php?cPath=214_1167&products_id=1908 Just get the biggest one you can find and we will leave the bonnet off. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.