Kev.O Posted May 25, 2005 Share Posted May 25, 2005 Hi Guys. I've just bought a second hand Defi boost guage and controller so I have no fitting instructions. Can anyone help? The wires coming out of the unit are; red = perminent + black = -,so which one (white or orange) is the switched + and which is the illumination? after reading through the old threads, I now I have to fit a tee piece for the gauge, but where exactly and where can I get one from? Also, I have a boost controller on order so I'll probably fit the both together,will I need to purchase anythingelse to fit the controller? Sorry for all the questions, I'm just not very mechanically minded and don't want to damage the car. I'd rather check than mess my car up! Thanks in advance Quote Link to comment Share on other sites More sharing options...
merckx Posted May 25, 2005 Share Posted May 25, 2005 white - illumination orange - ignition Quote Link to comment Share on other sites More sharing options...
Faye Brother Posted May 25, 2005 Share Posted May 25, 2005 And you can print off the installation instructions here Quote Link to comment Share on other sites More sharing options...
Kev.O Posted May 25, 2005 Author Share Posted May 25, 2005 Thanks. Just need to work out where I can buy a tee piece. Is there a way of getting round the cutting of the existing pipework? Quote Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted May 25, 2005 Share Posted May 25, 2005 Get a T piece from Halfords, they are used for the windscreen washers. Quote Link to comment Share on other sites More sharing options...
merckx Posted May 25, 2005 Share Posted May 25, 2005 Thanks. Just need to work out where I can buy a tee piece. Is there a way of getting round the cutting of the existing pipework? A motor factor or decent car accesory shop, don't cut the existing tube on the car. I'm looking for a link to a previous post. Quote Link to comment Share on other sites More sharing options...
merckx Posted May 25, 2005 Share Posted May 25, 2005 http://www.mkivsupra.net/vbb/showthread.php?t=28260 Quote Link to comment Share on other sites More sharing options...
Kev.O Posted May 25, 2005 Author Share Posted May 25, 2005 I want to put the gauge in the airvent but it's bigger, how has anybody else got around this? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.