wez_p Posted May 25, 2005 Share Posted May 25, 2005 ok, i've had a go at removing the rear panel to get to my drivers side seatbelt (i'm replacing it) and i can find a few removable bolts and part of it unclips but it will not come out as far as i can tell without something obvious i'm missing does anyone have instructions (or desctructions in my case) or a diagram maybe that shows how to remove the panel & get to the seatbelt? thanks, Wes Link to comment Share on other sites More sharing options...
MONKEYmark Posted May 25, 2005 Share Posted May 25, 2005 i have took mine out, you have to take out the plastic interior body panels out to get to them. its pretty straight forward. just follow edges of panels and unscrew them. need to take out speaker mesh to get to some more bolts underneath from what i can remember it just pops off. Link to comment Share on other sites More sharing options...
wez_p Posted May 31, 2005 Author Share Posted May 31, 2005 ah that could be what i'm missing, the ones under the speaker mesh. will attempt it again asap - thanks Mark Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now