Dave222 Posted April 9, 2010 Share Posted April 9, 2010 For sale Mines ECU, this is from my 1993 J-Spec 6 speed manual TT, replaced with an AEM when I went single. Looking for around £300 + P&P. Please PM if interested. Link to comment Share on other sites More sharing options...
ray007 Posted April 9, 2010 Share Posted April 9, 2010 What is the benifits of this ecu? and would it be suitable for a 5speed TT? Link to comment Share on other sites More sharing options...
pistonbroke Posted April 10, 2010 Share Posted April 10, 2010 The benefits are built in fuel cut, so no need for a seperate fuel cut defender. There is very little concrete info on them, but from what I've read (I've got one in my BPU), the rev limit is slightly raised, and the mapping has been made slightly more aggressive for a performance increase. They are perfect for BPU cars as you need no other ancillary components bolted to the ECU to make it run. Make sure you only use good fuel in with them, as they are obviously mapped for high octane stuff. Performance differences are minimal on the rolling road, but apparently the car feels faster than an equivalent tune car without the mines side by side. Link to comment Share on other sites More sharing options...
Dave222 Posted April 10, 2010 Author Share Posted April 10, 2010 To Ray007, as above but I don't know if it would be suitable for a 5 speed. Sorry mate. Dave Link to comment Share on other sites More sharing options...
Dave222 Posted April 10, 2010 Author Share Posted April 10, 2010 As requested some photos of the ECU And just in case you cannot read the Mines Plaque the number on it is 9381. Hope this helps Dave. Link to comment Share on other sites More sharing options...
Recommended Posts