Pred Posted April 4, 2010 Share Posted April 4, 2010 Hi, i fitted my centerforce dual friction yesterday. no i have a problem the clutch wont release. i can push the pedal but the clutch wont release. the release fork push the release bearing only ~1cm in direction to the drive shaft Does anybody knows this problem? I refitted now the complete gearbox with this f***** clutch 4 tims regards Andi Link to comment Share on other sites More sharing options...
Terminator Posted April 5, 2010 Share Posted April 5, 2010 Have you got any photos of the clutch, release mech and slave cylinder? Link to comment Share on other sites More sharing options...
Guest danny220 Posted April 5, 2010 Share Posted April 5, 2010 Sounds like one of the clutch cylinders have gone! Link to comment Share on other sites More sharing options...
JODY T Posted April 5, 2010 Share Posted April 5, 2010 Are u sure the clutch plate is the correct way round? Or the fork not in correct place? Link to comment Share on other sites More sharing options...
Lee P Posted April 5, 2010 Share Posted April 5, 2010 You cant put the plates in the wrong way round, try adjusting the master cylinder with the rod on the pedal. I did one recently and it wouldnt clear untill I adjusted it all the way. If it still doesnt clear then there is a problem with the clutch cover. Link to comment Share on other sites More sharing options...
InSvain Posted April 5, 2010 Share Posted April 5, 2010 i`ve had a problem once with my mastercylinder that was worn and it came up after i installed a new clutch pushing down the pedal; no problem pedal not coming back; needed some help from my foot:d how to solve this problem, install a new mastercylinder and to make sure also a new slavecylinder and btw you`re gonna have lots of fun with changing the mastercylinder:eyebrows: Link to comment Share on other sites More sharing options...
Pred Posted April 6, 2010 Author Share Posted April 6, 2010 The clutch works now! But i doesnt found the problem?! I cleaned the clutch and put it togehter in the gearbox and now.. it works... i dont know why but... its ok Link to comment Share on other sites More sharing options...
MartinBattye Posted April 6, 2010 Share Posted April 6, 2010 air in hyd system? Link to comment Share on other sites More sharing options...
trinitom Posted April 6, 2010 Share Posted April 6, 2010 air in hyd system? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now