Jump to content
The mkiv Supra Owners Club

PHATBOY 8 Piston Big Brake Kit (380x32mm)


Hassan

Recommended Posts

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

have you got 19'' wheels to go under?

 

Unless you go for a Full UK brake setup, these packages are not worth it in my opinion dude, i was looking at something similar, spoke with a few people and unless you go for like a AP racing kit, then UK brake setup is the daddy until you save some serious cash.

Link to comment
Share on other sites

Many many moons ago HiSpec used my car for the Supra pattern, sadly the setup I had lasted one trackday, one of the issue with a none floating setup and ally bells, the stock setup worked much better.

 

If I was looking into a replacement setup the only real options for me would be AP, Brembo, Alcon and possibly Stoptechs.

Link to comment
Share on other sites

Many many moons ago HiSpec used my car for the Supra pattern, sadly the setup I had lasted one trackday, one of the issue with a none floating setup and ally bells, the stock setup worked much better.

 

If I was looking into a replacement setup the only real options for me would be AP, Brembo, Alcon and possibly Stoptechs.

 

Hi, i thought ksport had a good rep around here?

Link to comment
Share on other sites

For that money bugger it i would give am a crack TBH. hell it isn't rocket science with brakes- I know I am gonna get flamed but they are simply hydraulic pistons which need to withstand ceratin amounts of generated heat. (granted if I was tracking I would definately NOT use these but for general everyday driving and bling status why not?).

That said I know people who have cooked brembo's on the track and the seals then leaked- admittedly the bloody discs looked like a turbo manifold after a hard run when this happened (glowing red like you see some of them race car pictures are).. I would just be a little more careful when driving spiritedly until I was 100% happy with their operation. Your life depends on your brakes when driving I know but I am just saying in all probability they will be fine- hell he even says in the listing you can use Brembo pads in them- all the asians do is buy one set of high spec brakes etc and reverse engineer them so in all likelyhood they are pretty close copy's of some other big name brand.

Just my 02c and as I said I know I am gonna get flamed over it- but I do understand and stated earlier your life depends on your brakes so keep that in mind. But if you get some and find them ok PM me so I can get some lol- go the guinea pig...!!

Does anyone know would these rattle like the reports I have heard about other cheaper 2 piece rotor kits?

Edited by jihwaan (see edit history)
Link to comment
Share on other sites

For that money bugger it i would give am a crack TBH. hell it isn't rocket science with brakes- I know I am gonna get flamed but they are simply hydraulic pistons which need to withstand ceratin amounts of generated heat. (granted if I was tracking I would definately NOT use these but for general everyday driving and bling status why not?).

That said I know people who have cooked brembo's on the track and the seals then leaked- admittedly the bloody discs looked like a turbo manifold after a hard run when this happened (glowing red like you see some of them race car pictures are).. I would just be a little more careful when driving spiritedly until I was 100% happy with their operation. Your life depends on your brakes when driving I know but I am just saying in all probability they will be fine- hell he even says in the listing you can use Brembo pads in them- all the asians do is buy one set of high spec brakes etc and reverse engineer them so in all likelyhood they are pretty close copy's of some other big name brand.

Just my 02c and as I said I know I am gonna get flamed over it- but I do understand and stated earlier your life depends on your brakes so keep that in mind. But if you get some and find them ok PM me so I can get some lol- go the guinea pig...!!

Does anyone know would these rattle like the reports I have heard about other cheaper 2 piece rotor kits?

 

I know what you saying there mate but as you said your life depends on them. I don't like the way they don't even have a name, also there is alot of cheap crap coppies coming from asia. I seen a test with seats that when in a crash they just broke up. If it was me i would go for the ksport at least you know what your buying.

Link to comment
Share on other sites

I know what you saying there mate but as you said your life depends on them. I don't like the way they don't even have a name, also there is alot of cheap crap coppies coming from asia. I seen a test with seats that when in a crash they just broke up. If it was me i would go for the ksport at least you know what your buying.

 

Actually I agree totally, but on the other hand I have seen a hell of a lot of good copies of *SOME* stuff come out of asia. Then again I have seen some bad stuff (chinese wastegates get stuck open - seats as you said just fold up in a crash etc).

 

I suppose at the end of the day you have to realise its a 50/50 gamble- and with brakes, yes, it probably inst worth that gamble..

Link to comment
Share on other sites

they look wiked lol. they might be absolute pants , but they look real good lol

 

That's the problem with these big brake kits, made to a budget, not a specification.

 

I would only ever look at reputable, proven brake companies such as Brembo, AP, Alcon, Stoptech etc, or maybe Wilwood if I couldn't afford the above (although I hear they're not great).

 

I'd rather stock UK brakes than the like of D2, KAD, K-Sport, Hi-spec etc

Link to comment
Share on other sites

i changed my uk setup with G2 disks with 8 pot / 6 pot D2 . They were crap..... but then i changed the brake pads and they really stop well ...but then again i saved 500 against a set of AP , but had to spend 600 for new race pads... should have gone down the AP route...its the pads thats the key ..

Link to comment
Share on other sites

For that money bugger it i would give am a crack TBH. hell it isn't rocket science with brakes- I know I am gonna get flamed but they are simply hydraulic pistons which need to withstand ceratin amounts of generated heat. (granted if I was tracking I would definately NOT use these but for general everyday driving and bling status why not?).

That said I know people who have cooked brembo's on the track and the seals then leaked- admittedly the bloody discs looked like a turbo manifold after a hard run when this happened (glowing red like you see some of them race car pictures are).. I would just be a little more careful when driving spiritedly until I was 100% happy with their operation. Your life depends on your brakes when driving I know but I am just saying in all probability they will be fine- hell he even says in the listing you can use Brembo pads in them- all the asians do is buy one set of high spec brakes etc and reverse engineer them so in all likelyhood they are pretty close copy's of some other big name brand.

Just my 02c and as I said I know I am gonna get flamed over it- but I do understand and stated earlier your life depends on your brakes so keep that in mind. But if you get some and find them ok PM me so I can get some lol- go the guinea pig...!!

Does anyone know would these rattle like the reports I have heard about other cheaper 2 piece rotor kits?

 

Its not just about track days, what about emergency stops - I rather go for something tried and tested, made to a high standard from a reputable brake specialist (Oh - I am running Toyota UK Brakes)

 

You might want to punt it with yours and others lives, I rather not.

 

imi

Link to comment
Share on other sites

Its not just about track days, what about emergency stops - I rather go for something tried and tested, made to a high standard from a reputable brake specialist (Oh - I am running Toyota UK Brakes)

 

You might want to punt it with yours and others lives, I rather not.

 

imi

 

I think you may have missed the rest of my post:

"I would just be a little more careful when driving spiritedly until I was 100% happy with their operation"

 

or

"but I do understand and stated earlier your life depends on your brakes so keep that in mind"

 

and then in a subsequent post:

"I suppose at the end of the day you have to realise its a 50/50 gamble- and with brakes, yes, it probably inst worth that gamble.."

 

And I believe you are running toyota japan brakes that were standard fitment to UK supra's- or maybe yours are speshal and made by toyota in England- mine are Japanese Toyota brakes..- then again I dont know very much..

 

I run Nascar spec outlaw racing brakes on my other ride - I dont like the insinuation that I would like to gamble with my life or anyone elses... My point was simply dont dismisss something just because :

A: its made in another asian country other than Japan

B: you dont know much about it (every company has to start somewhere)

and C: because they are cheaper than others...

 

that said as I believe I inferred by my posts it probably isnt worth risking with brakes but if you are willing to do a little R&D yourself maybe they would be ok- maybe they would be cr*p.. maybe with a change of pads they would be as good as toyota UK brakes...

 

flame away people...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.