seanfraser Posted March 30, 2010 Share Posted March 30, 2010 hi guys my sup has a carbon dash kit (overlay) throughout and just wondered if anyone could recommend ways to remove it without harming the panels underneath too much thanks Quote Link to comment Share on other sites More sharing options...
sams Posted March 30, 2010 Share Posted March 30, 2010 Which bits have been overlayed I assume the drivers console, as in the pannels originally covered in the tuber protector stuff Quote Link to comment Share on other sites More sharing options...
seanfraser Posted March 30, 2010 Author Share Posted March 30, 2010 its one of those 24 piece kits, so yep all the panels around door handles, speedos, gearstick etc etc Quote Link to comment Share on other sites More sharing options...
rick001 Posted March 30, 2010 Share Posted March 30, 2010 Try using a hair dryer and carefully peel them off Quote Link to comment Share on other sites More sharing options...
sams Posted March 30, 2010 Share Posted March 30, 2010 Il swap you for the bits off the dash lol Quote Link to comment Share on other sites More sharing options...
fizzle Posted March 30, 2010 Share Posted March 30, 2010 a sell/swap would probably be your best bet if you dont like it... scraping all the glue of is going to be a knightmare... Quote Link to comment Share on other sites More sharing options...
Supra2Man Posted March 30, 2010 Share Posted March 30, 2010 If it's an auto I'll take or swap with you :-))) Quote Link to comment Share on other sites More sharing options...
seanfraser Posted April 1, 2010 Author Share Posted April 1, 2010 used a heat gun at work and it came straight off no residue, it was the real carbon fibre kit (silver) can begin painting now Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.