dcarrter21 Posted March 18, 2010 Share Posted March 18, 2010 ive recently put my ttengine back in the car. when i start it its missfiring badly. it was fine when i took it out....... took the plugs out and cleaned them,no change.. anyhelp would be good as ive got a drift day saturday! car was meant to be running weeks ago but due to a few things its all at the last minute! Dave Link to comment Share on other sites More sharing options...
leelbuk Posted March 18, 2010 Share Posted March 18, 2010 Are the coil pack connectors definitely connected in correct order Dave? Plugs ok? I'm sure someone else might offer an explaination! I've got a few working coil packs at home and spark plugs at home if they are needed to test that is what's suspect. On a side note too mate, I've got your Caliper bolt to drop round. Link to comment Share on other sites More sharing options...
dcarrter21 Posted March 18, 2010 Author Share Posted March 18, 2010 ahrite, cheers. could you pop round tonite with coil pack connectors aswell? a few of mine are broke. cheers mate Link to comment Share on other sites More sharing options...
leelbuk Posted March 18, 2010 Share Posted March 18, 2010 ahrite, cheers. could you pop round tonite with coil pack connectors aswell? a few of mine are broke. cheers mate Got no connectors left dude but as long as you make sure they are tight on the coilpacks then they shouldn't cause an issue on your driveway. I'll bring coilpack though! Link to comment Share on other sites More sharing options...
Chris Wilson Posted March 18, 2010 Share Posted March 18, 2010 How did you clean the plugs? Short of a proper plug blaster you can't clean them successfully. I would fit a new set of plugs and all new coil connectors before you go, if you can get some in time. Link to comment Share on other sites More sharing options...
RobSheffield Posted March 18, 2010 Share Posted March 18, 2010 Why was the engine out? Are all the loom connectors back in the right place, and all engine earths? Link to comment Share on other sites More sharing options...
leelbuk Posted March 18, 2010 Share Posted March 18, 2010 Got it working in the end Unplugged a coil pack one at a time at found cylinder 6 wasn't firing. Turned out to be a dead plug in the end. I'll leave Dave to tell the tale of why his engine is out *again* Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now