michel lane Posted March 1, 2010 Share Posted March 1, 2010 Since i stopped upgrading cars, i am slowly clearing the garage out with all my bits, here is a selection of items available . All electrical items work as i have tried them on my TT engine and VVTI engine cars 1: 1997- VVTI ignitor pack £180 - fully working 2: 1996 -TT ignitor pack £180 - fully working 3: VVTI coil packs 3 units £200 - arond 40k 4: Blitz dual boost solinode (not controller) the black box - £50 7: VVTI MAF sensor £80 8: TT map sensor £40 9: TT cam belt tensioner - fits on oil pump £40 10: Boost logic 4 inch back box with silencer -£80 (needs a clean) 11:Greddy emanage blue with full TT harness and boost solinode £250 12 :6 * Precison low imp top feed 880cc injectors (new) £300 14: TT cam sensor £30 each 15: TT manual Radiator (good conditon) £80 16: Silver Khan 18 inch rims 5 spoke type, 9.5inch rear / 8.5 fronts very little kerbing on rims , overall pretty good condition, tyres are about 4-5mm, it varies on each wheel. £400 17:VVTI head, excellent conditon excludes cams, just bare head with valves \ springs \shims £250 19: TT head as above £200 21:gt4088r .68ar - used for a short while and upgraded to 71mm turbo, has a few tiny chips on the exhaust housing, not the chunky type as seen on here. there is about 4 - .5mm chips. £450 22:TT intake manifold -£40 24: TT lower runner - £15 25: TT track control TPS £30 each 26 : 4 inch polished XS power FMIC , excellent condition £100 30: Fuel pressure guage to mount directly onto the fuel regulator £15 31:RPS 6 puck disk used for around 2000 miles (disk only) £150 32: UK spec 550 injectors with rail - £120 33: NEW CP PISTONS stock size - £475 34: Clevite 77 bearing set for 2jzgte -£100 35: Bliz dual BOV as new with adaptor for stock mount - £80 36: HKS 40MM WASTEGATE with flange to weld onto manifold £150 i will add more when i come across anything. P&P not included. Link to comment Share on other sites More sharing options...
Davey001 Posted March 1, 2010 Share Posted March 1, 2010 1st dibs on the innovate wideband! Link to comment Share on other sites More sharing options...
monsween Posted March 1, 2010 Share Posted March 1, 2010 PM'd Throttle body Link to comment Share on other sites More sharing options...
ray007 Posted March 1, 2010 Share Posted March 1, 2010 pmd regarding gauges Link to comment Share on other sites More sharing options...
Tourniquet Posted March 1, 2010 Share Posted March 1, 2010 Anything Im likely to need or break in the near future - :-) lol Link to comment Share on other sites More sharing options...
Chris Wilson Posted March 1, 2010 Share Posted March 1, 2010 1st dibs on the innovate wideband! Sorry to butt in, would you please check your PM's? I stupidly paid you twice via Paypal for that air box, would you mind sending me a refund of the second payment? Thanks Link to comment Share on other sites More sharing options...
Davey001 Posted March 1, 2010 Share Posted March 1, 2010 Sorted mate! Link to comment Share on other sites More sharing options...
pedrosixfour Posted March 1, 2010 Share Posted March 1, 2010 Are the brake pads new Michel? Same type that was in the UK brake set-up I bought from you last year? Link to comment Share on other sites More sharing options...
barneybrendan Posted March 1, 2010 Share Posted March 1, 2010 pm sent Link to comment Share on other sites More sharing options...
Chris Wilson Posted March 1, 2010 Share Posted March 1, 2010 Sorted mate! Thanks, appreciated,. money received AOK. Link to comment Share on other sites More sharing options...
marc_p Posted March 1, 2010 Share Posted March 1, 2010 Does the FMIC come with all bit's for fitting? Link to comment Share on other sites More sharing options...
marcAB10 Posted March 1, 2010 Share Posted March 1, 2010 any pics of the backbox? 1st dibbs for now. Link to comment Share on other sites More sharing options...
Davey001 Posted March 1, 2010 Share Posted March 1, 2010 PM Sent for innovate Wideband! Link to comment Share on other sites More sharing options...
Kopite Posted March 1, 2010 Share Posted March 1, 2010 Are those twin fans the ones i wanted Link to comment Share on other sites More sharing options...
michel lane Posted March 2, 2010 Author Share Posted March 2, 2010 Are the brake pads new Michel? Same type that was in the UK brake set-up I bought from you last year? Yes they are new and yes same type. £10 delivery Link to comment Share on other sites More sharing options...
michel lane Posted March 2, 2010 Author Share Posted March 2, 2010 Are those twin fans the ones i wanted yep ... you dont need them !!! Link to comment Share on other sites More sharing options...
michel lane Posted March 2, 2010 Author Share Posted March 2, 2010 Does the FMIC come with all bit's for fitting? No just FMIC no pipes , its 4 inch version Link to comment Share on other sites More sharing options...
michel lane Posted March 2, 2010 Author Share Posted March 2, 2010 any pics of the backbox? 1st dibbs for now. will take pics tomorrow, you do know its 4 inch ? Link to comment Share on other sites More sharing options...
pedrosixfour Posted March 2, 2010 Share Posted March 2, 2010 Yes they are new and yes same type. £10 delivery Thats fine Michel. Is paypal possible? Link to comment Share on other sites More sharing options...
dude Posted March 2, 2010 Share Posted March 2, 2010 Hemjohnny needs an FMIC that would be ideal. Link to comment Share on other sites More sharing options...
ray007 Posted March 2, 2010 Share Posted March 2, 2010 1st dibbs on the defi gauges Link to comment Share on other sites More sharing options...
stuart hydzik Posted March 2, 2010 Share Posted March 2, 2010 Hi Any chance for som pics of the aap polished fan suround please? Link to comment Share on other sites More sharing options...
michel lane Posted March 2, 2010 Author Share Posted March 2, 2010 Hi Any chance for som pics of the aap polished fan suround please? they look like this : but in a box: Link to comment Share on other sites More sharing options...
Racman Posted March 2, 2010 Share Posted March 2, 2010 dibbs on the fuel pressure gauge pls pm me your total price pls. Link to comment Share on other sites More sharing options...
michel lane Posted March 2, 2010 Author Share Posted March 2, 2010 dibbs on the fuel pressure gauge pls pm me your total price pls. Fuel pressure guage to mount directly onto the fuel regulator £15 do you have a fuel pressure reg to mount in onto ?. £5 postage please Link to comment Share on other sites More sharing options...
Recommended Posts