RobAce Posted February 26, 2010 Share Posted February 26, 2010 ok i have i have now finished my 6 speed manual conversion and i have changed the dash clocks over but the triangle warning light on the dash is constantly lit, even though the car seems to drive fine. does anyone know wot this light might represent or wot faults it lights for rob Link to comment Share on other sites More sharing options...
SupraHuman Posted February 26, 2010 Share Posted February 26, 2010 Brake fluid level? Link to comment Share on other sites More sharing options...
ray007 Posted February 26, 2010 Share Posted February 26, 2010 Is that the the same warning sign when doors are open or hand brake is up in the centre of the speedo? i have the same warning light constantly on.. have had it diagnosed from two different guys but no fault is showing up!! Link to comment Share on other sites More sharing options...
Class One Posted February 26, 2010 Share Posted February 26, 2010 You'll need to see if your ecu has any error codes stored. Link to comment Share on other sites More sharing options...
SupraHuman Posted February 26, 2010 Share Posted February 26, 2010 (edited) Is that the the same warning sign when doors are open or hand brake is up in the centre of the speedo? i have the same warning light constantly on.. have had it diagnosed from two different guys but no fault is showing up!! Yes it's the same light. First place to check when the lights comes on for no apparant reason. Quite sensitive the ol' fluid reservoir. Edited February 26, 2010 by SupraHuman Spelling (see edit history) Link to comment Share on other sites More sharing options...
RobAce Posted February 26, 2010 Author Share Posted February 26, 2010 there is loads of brake fluild in the tank and the light was not on before i did the manual conversion Link to comment Share on other sites More sharing options...
Steve Posted February 26, 2010 Share Posted February 26, 2010 Are you still using the Auto ECU? Don't you have to do something with the plug that went to the autobox? Link to comment Share on other sites More sharing options...
RobAce Posted February 26, 2010 Author Share Posted February 26, 2010 Are you still using the Auto ECU? Don't you have to do something with the plug that went to the autobox? as far as i know all u have to do is the reversing light and the thing so it thinks its park all the time and done both of them Link to comment Share on other sites More sharing options...
RobAce Posted March 4, 2010 Author Share Posted March 4, 2010 any other ideas on this. the odd thing is that it is only the triangle warning light and no others Link to comment Share on other sites More sharing options...
Ric Posted March 4, 2010 Share Posted March 4, 2010 have you checked the error codes? Link to comment Share on other sites More sharing options...
RobAce Posted March 4, 2010 Author Share Posted March 4, 2010 i havent but been told by a very relyable source that if it was a fault code the engine management light would be on Link to comment Share on other sites More sharing options...
RobAce Posted March 6, 2010 Author Share Posted March 6, 2010 does anyone have a list of all the faults that the triangle warning light comes on for Link to comment Share on other sites More sharing options...
Miguel Posted March 6, 2010 Share Posted March 6, 2010 Start with the simplest things that you have disturbed recently, try the switch on the hand brake. Link to comment Share on other sites More sharing options...
dude Posted March 6, 2010 Share Posted March 6, 2010 Start with the simplest things that you have disturbed recently, try the switch on the hand brake. Link to comment Share on other sites More sharing options...
RobAce Posted March 6, 2010 Author Share Posted March 6, 2010 Start with the simplest things that you have disturbed recently, try the switch on the hand brake. i did think that but the other warning light on the dash still goes out when u take the hand brake off , just leaves the triangle on Link to comment Share on other sites More sharing options...
patrikbrunt Posted March 6, 2010 Share Posted March 6, 2010 does the engine management light come on when you first turn the ignition on? Link to comment Share on other sites More sharing options...
Miguel Posted March 6, 2010 Share Posted March 6, 2010 Are your sure you haven't got any fault codes, Rob? Just check them anyway. Link to comment Share on other sites More sharing options...
RobAce Posted March 7, 2010 Author Share Posted March 7, 2010 the engine management light does come on with the ignition the goes out when u start the engine. I will check for fault codes. Link to comment Share on other sites More sharing options...
Miguel Posted March 7, 2010 Share Posted March 7, 2010 I will check for fault codes. As you have already mentioned, it may not throw up anything if there are no other lights partnering it (assuming all your warning bulbs work), but you never know. I would retrace my steps and check all the connections. Did you swap the clocks over to manual ones? Maybe swap them back as a test. Link to comment Share on other sites More sharing options...
RobAce Posted March 11, 2010 Author Share Posted March 11, 2010 ok checked fault code and it only came up 47 but new that. i did change the clocks for manual ones and so i thought the same as u and changed them back but it was still on. very frustrating considering car drives lovely Link to comment Share on other sites More sharing options...
Miguel Posted March 12, 2010 Share Posted March 12, 2010 (edited) Get hold of Matt, he may be able to spoil you with a theory he has come up with as to why your light is on. Edited March 12, 2010 by Miguel (see edit history) Link to comment Share on other sites More sharing options...
Terminator Posted March 12, 2010 Share Posted March 12, 2010 Is your auto box management unit still in the car? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now