Guest reiss Posted February 17, 2010 Share Posted February 17, 2010 ive finally got my car sorted ! got some 800cc sard injectors and an aem piggyback ecu got it mapped by ryan g who can i say has done an awesome job ! problem is my car has a misfire on high revs when he tried to map it on high boost ive ordered some coil pack connectors as mine are in poor condition anyone got any suggestions what else it could be ? Link to comment Share on other sites More sharing options...
miko_supra Posted February 17, 2010 Share Posted February 17, 2010 The coil packs themselves? Check for small cracks on the stems Link to comment Share on other sites More sharing options...
Guest reiss Posted February 18, 2010 Share Posted February 18, 2010 ive replaced coil packs and connectors any other suggestions? Link to comment Share on other sites More sharing options...
dr_jekyll Posted February 18, 2010 Share Posted February 18, 2010 old plugs, gap, bad engine earth? some things to try Link to comment Share on other sites More sharing options...
Ryan.G Posted February 18, 2010 Share Posted February 18, 2010 Reiss, Did you follow the guide from mkivsupra.net when doing the connectors as i bet its the pin gap which is causing the problem and you just put the new clips on without sorting the pins. See this guide http://www.mkivsupra.net/vbb/showthread.php?t=61141 Ryan Link to comment Share on other sites More sharing options...
Guest reiss Posted February 19, 2010 Share Posted February 19, 2010 No i didnt adjust the pin gaps ryan ! will get on it straight away ! Link to comment Share on other sites More sharing options...
Guest reiss Posted February 19, 2010 Share Posted February 19, 2010 Problem solved ! It was the pin gaps ! nice one ryan much appreciated Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now