Geo Posted January 28, 2010 Share Posted January 28, 2010 Just need some help guys. Iv got my Weds, iv got my spigot rings, tyres getting ordered soon, so all i need now is a good set of Wheel Nuts. I want a set thats good fitting, so that im not hitting the chrome wheel putting on the Socket. Pic of wheel below, im looking at either black or silver cheers. Link to comment Share on other sites More sharing options...
The-Plethora Posted January 28, 2010 Share Posted January 28, 2010 As an addition to this I wouldnt mind knowing what thread pitch locking wheel nuts the supra uses e.g. 1.25, 1.50 etc, bought some for the old car and it was a pricey mistake. Link to comment Share on other sites More sharing options...
nevins Posted January 28, 2010 Share Posted January 28, 2010 pitch is 1.50, and after market alloys will have a 60 degree seat on them. Also if you are after tidy nut go for Ultralite. Link to comment Share on other sites More sharing options...
merckx Posted January 28, 2010 Share Posted January 28, 2010 (edited) M12 x 1.50 Look for tuner wheel nuts, they're narrow and are supplied with their own tool instead of using a normal socket which goes over the nut. Loads of them on Ebay. http://shop.ebay.co.uk/?_from=R40&_trksid=p4712.m38.l1313&_nkw=tuner+wheel+nuts&_sacat=See-All-Categories Edited January 28, 2010 by merckx (see edit history) Link to comment Share on other sites More sharing options...
Geo Posted January 28, 2010 Author Share Posted January 28, 2010 cheers guys. In addition was told to stay away from ultra lite. Link to comment Share on other sites More sharing options...
Geo Posted January 28, 2010 Author Share Posted January 28, 2010 is there steel ones available?? Who else is running Ultralite ones, been speaking to jamie and he's running titanium ones, but i dont fancy spending £100+ of wheel nuts, just wondering if any of you guys have had any problems with your wheel nuts?? cheers Link to comment Share on other sites More sharing options...
magictorch Posted January 28, 2010 Share Posted January 28, 2010 Fitted Ultralite ones on mine today, came with the my Rota Boost Drifts..... i was already aware that they are a bit soft and i bought a longer thin walled socket so that they dont catch as they are a tight fit:) Link to comment Share on other sites More sharing options...
Kirk Posted January 28, 2010 Share Posted January 28, 2010 (edited) mikes been running ultralite on his no problems at all Edited January 28, 2010 by Kirk (see edit history) Link to comment Share on other sites More sharing options...
pistonbroke Posted January 28, 2010 Share Posted January 28, 2010 Bit off topic, but my god..................those wheels.......... Link to comment Share on other sites More sharing options...
Wez Posted January 28, 2010 Share Posted January 28, 2010 I have Volk wheel nuts on mine. Link to comment Share on other sites More sharing options...
Geo Posted January 28, 2010 Author Share Posted January 28, 2010 Bit off topic, but my god..................those wheels.......... You like them then?? If all goes well they should be on by next week Dan I have Volk wheel nuts on mine. like these Wez? http://shop.ebay.co.uk/i.html?_nkw=volk+wheel+nuts&_sacat=0&_trksid=p3286.m270.l1313&_odkw=volk+whee+nuts&_osacat=0 Link to comment Share on other sites More sharing options...
shh Posted January 28, 2010 Share Posted January 28, 2010 been running ultralite steel wheel nuts for 3 years, no probs, i got the star key type in chemical black, dont get thestainless, they are crap, the alloy nuts must be put on with copper grease or they react/corode to the stud, all alloy nuts need extra care, dont over tighten etc, they will stretch. the ultra light steel nuts in chem black are only 90p each!! from spd autos Link to comment Share on other sites More sharing options...
nevins Posted January 28, 2010 Share Posted January 28, 2010 been running ultralite steel wheel nuts for 3 years, no probs, i got the star key type in chemical black, dont get thestainless, they are crap, the alloy nuts must be put on with copper grease or they react/corode to the stud, all alloy nuts need extra care, dont over tighten etc, they will stretch. the ultra light steel nuts in chem black are only 90p each!! from spd autos ultalite nuts 90p each have you got a link for these as they aint cheap to buy from what iv seen. Link to comment Share on other sites More sharing options...
Geo Posted January 28, 2010 Author Share Posted January 28, 2010 ultalite nuts 90p each have you got a link for these as they aint cheap to buy from what iv seen. you beat me to it?? you got super duper fast typing fingers then?? Link to comment Share on other sites More sharing options...
nevins Posted January 28, 2010 Share Posted January 28, 2010 lol, iv been getting quotes up over £80 for them, if they are 90 think il buy the whole lot that they have in stock and then get selling on e-gay. Link to comment Share on other sites More sharing options...
Wez Posted January 28, 2010 Share Posted January 28, 2010 like these Wez? http://shop.ebay.co.uk/i.html?_nkw=volk+wheel+nuts&_sacat=0&_trksid=p3286.m270.l1313&_odkw=volk+whee+nuts&_osacat=0 Thats them yeah, I got mine from the same place as the spigot rings as they had them in stock and I needed them quickly for Time Attack Link to comment Share on other sites More sharing options...
shh Posted January 28, 2010 Share Posted January 28, 2010 http://www.japshop.co.uk/acatalog/copy_of_Wheel_Nuts_-_1.5.html Link to comment Share on other sites More sharing options...
Kirk Posted January 28, 2010 Share Posted January 28, 2010 (edited) all the ultralite nuts are alloy as far as im aware.. my personal choice would be muteki open ended nuts, forged steel and super strong but light weight at only 25g... the closed end type are 36g. to be honest though i doubt they be much use to you as the locking key is quite large Edited January 28, 2010 by Kirk (see edit history) Link to comment Share on other sites More sharing options...
nevins Posted January 28, 2010 Share Posted January 28, 2010 bloody hell I didn't expect that. Geo he was right mate. Link to comment Share on other sites More sharing options...
supramkivcork Posted January 28, 2010 Share Posted January 28, 2010 Must order a set of those ultralite black ones for myself. Have a set of chrome ones that have corroded quite badly . Good price. Link to comment Share on other sites More sharing options...
Geo Posted January 28, 2010 Author Share Posted January 28, 2010 Very Nice, will be getting some of these ordered tomorrow then. Link to comment Share on other sites More sharing options...
supramkivcork Posted January 28, 2010 Share Posted January 28, 2010 Try organise a group buy from here Geo, try get them for 80p a nut , lol. Link to comment Share on other sites More sharing options...
nevins Posted January 28, 2010 Share Posted January 28, 2010 set coming my way aswell, thanks to shh for the link. Link to comment Share on other sites More sharing options...
Geo Posted January 28, 2010 Author Share Posted January 28, 2010 http://www.japshop.co.uk/acatalog/copy_of_Wheel_Nuts_-_1.5.html cheers dude, great link. Link to comment Share on other sites More sharing options...
Matt _Aero top_ Posted January 28, 2010 Share Posted January 28, 2010 i have some i bought from envy and never fitted , there called macard or something , there ment to be good ones anyway , there just the lockers though . Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now