dandan Posted December 9, 2009 Share Posted December 9, 2009 I'm currently working on my water injection install (in the boot of the Supe) and need a windscreen washer pump to act as a primer for the main WI pump. This keep consistent flow to the Aquamist pump and actually boosts the flowrate a little as well. Does anyone know of any windscreen washer pumps that are connected by hose on the inlet and outlet side (rather than sat in a rubber grommet in the washer bottle)? The reason I ask...if I can get a "hose fed" windscreen washer pump then I have 100% flexibility on the tank as opposed to making some sort of washer bottle with integrated pump fit into the boot location I have in mind. The plan is to site the tank, pump and solenoid assembly in the boot tucked down below carpet level on the left hand side where the grey polystyrene piece sits. Cheers Dan Mod: I wasn't sure if this was best suited to Non Supra Tech or in here. Sorry if it's in the wrong place. Quote Link to comment Share on other sites More sharing options...
chrispot Posted December 9, 2009 Share Posted December 9, 2009 i dont know if they are any good for you but you could try a inline pump that caravaners use for there taps in the sink, i brought one years ago that i was going to use on a charge cooler it had 8mm or 12mm connections on it , a company near me sells them they are called camping and general , or try looking around on ebay, good luck regards chris. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.