for sale Few bits for sale.

[gavin.starr]

I have a few parts for sale some supra related and some not.

 

All prices plus delivery

 

J-spec ECU Brackets:- £2.50

 

http://farm3.static.flickr.com/2638/4105906811_4116840663_m.jpg

 

I’m still debating selling the carbon dash kit but if I get some sensible offers than I may be persuaded as it is brand new and has never left the box :- SOLD

 

http://farm3.static.flickr.com/2523/4105906819_2b7789a813_m.jpg

 

J-spec plastic intercooler pipes :- £15.00

 

http://farm3.static.flickr.com/2495/4105906829_a265c553d0_m.jpg

 

J-spec stock springs good condition Slight surface rust on the mating faces:- SOLD

 

http://farm3.static.flickr.com/2522/4105907085_29723d86e0_m.jpg

 

J-spec stock Toyota Bilstein shocks good condition bit of surface rust :- SOLD

 

http://farm3.static.flickr.com/2653/4105907335_b85e838eec_m.jpg

 

J-spec stock ceramic Turbo’s one is completely fewked and the other is fine but has the notorious small hairline crack in the manifold. Again offers as i have no idea what they are worth. Aluminium intake side could be used for polishing :- offers.

 

http://farm3.static.flickr.com/2614/4106691776_552dbde3ec_m.jpg

 

http://farm3.static.flickr.com/2626/4106691832_77a67e8002.jpg

 

http://farm3.static.flickr.com/2545/4106691864_d77fe7f660.jpg

 

http://farm3.static.flickr.com/2777/4106691884_8601a524bd.jpg

 

AND NOW THE NONE SUPRA RELATED.

 

Homemade jet engine i’ve run it once and it could do with a little more welding. If you like tinkering then this is a great fun little project, it kicks out about 30-35 pounds of thrust which is’nt a lot but sounds ace runs from propane gas :- £ 60

 

http://farm3.static.flickr.com/2755/4106691892_370193ccd8.jpg

 

http://farm3.static.flickr.com/2527/4105906849_2e68bafc38_m.jpg

 

Large 3 phase stand alone drill which can be converted to normal mains electric by installing a new motor. this is very large and very heavy and would need to be collected in person. It comes with a metal base which makes it stand almost 6feet tall. It has an emergency cut off button for foot operation. just needs a little TLC on the operation button box (on/off) and a new drive belt. Not a cheap drill so again open to offers.

 

http://farm3.static.flickr.com/2628/4106081235_80791816d9_m.jpg

 

http://farm3.static.flickr.com/2727/4106081241_5279f00913.jpg

 

Clarke band saw slight surface rust and the pulley wheels need adjusting as it doesn’t cut straight. collection only as it weighs a lot :- £40.

 

http://farm3.static.flickr.com/2560/4106865548_cd5f1362d2.jpg

 

LinBin racking. I have three sheets of it aprox 2 foot wide by 4 foot long ideal for garage storage i dont have any of the bins just the racking bins can be bought from places such as ebay, again large and heavy for delivery.

:-£ 5 per sheet.

 

http://farm3.static.flickr.com/2556/4106081255_851e2406c5_m.jpg

 

 

red storage racking with a box full of hooks 8 sheets aprox 2 foot by 3 foot. very heavy duty and can carry a fair bit of weight on the hooks. i have 8 sheets so that is plenty for a large home garage to store you spanners tools etc... on. i would keep these myself but i don’t have the time to put it all up. again :- £5 per sheet and 10 for the box of hooks. i will do £45 all in if you want the job lot.

 

http://farm3.static.flickr.com/2729/4106081267_bbd7c35b89.jpg

 

http://farm3.static.flickr.com/2719/4106081279_79b915572d.jpg

 

Thanks for looking

 

P.S I work ridiculous hours so i won’t be able to post anything until the weekends.

 

Gavin.

[Kev_A]

PM sent regarding shocks

[gavin.starr]

PM sent regarding shocks

 

pm replied

[gavin.starr]

bump