Kirk Posted November 14, 2009 Share Posted November 14, 2009 OK Again, i started swapping in my manual pedals and asoon as i started i found the brake light switch dangling from the pedal so i continued to remove the old brake pedal and also found the bolt that holds it on was missing the plastic spacers so in the end ive taken off the entire cradle assembly and found the pedal had been binding against the cradle and also found that the cradles snapped where the switch is. Now would i be alright smoothing off the rough metal and weld the piece back on or replace the cradle entirely? Link to comment Share on other sites More sharing options...
little num Posted November 14, 2009 Share Posted November 14, 2009 get it welded mate you could even weld some strenghener bits on as well to help keep it together. Link to comment Share on other sites More sharing options...
absz Posted November 14, 2009 Share Posted November 14, 2009 looking at the pictures it seems that the metal is cast ally, so you will need a good tig welder to do this or it will just melt away when welding. Link to comment Share on other sites More sharing options...
Kirk Posted November 14, 2009 Author Share Posted November 14, 2009 yeah i thought that myself..... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now