krisso_pl Posted October 27, 2009 Share Posted October 27, 2009 Guys, I am trying to fit Corbeau Targas in my sup. I have fitted one seat with rewelded oem rails but the seat is mounted higher then stock and I dont know how to make it sit lower Anybody here with pics of low mounted buckets with runners? Link to comment Share on other sites More sharing options...
krisso_pl Posted October 27, 2009 Author Share Posted October 27, 2009 Anybody? Link to comment Share on other sites More sharing options...
johnd-mkiv Posted October 27, 2009 Share Posted October 27, 2009 your better off using a set of aftermarket runners and fabricating them to fit Link to comment Share on other sites More sharing options...
krisso_pl Posted October 27, 2009 Author Share Posted October 27, 2009 What about corbeau runners? I have read some posts with opinions that they dont fit and that there are some problems with them. What else do you suggest? Problem with corbeau's recliners it that they arent bolted to the sides and I really dont know where to put those sliders to make it sit lower Link to comment Share on other sites More sharing options...
SimonT Posted October 27, 2009 Share Posted October 27, 2009 Cant you use Bride subframes? If so im sure Whifbitz stock them Link to comment Share on other sites More sharing options...
krisso_pl Posted October 27, 2009 Author Share Posted October 27, 2009 Of course I can but they are expensive and I think it shouldn't be a big problem to make some custom brackets. All I need is to see how the good one looks like. I want to see how did they manage to make them sit as low as oem . anybody with some pics? Link to comment Share on other sites More sharing options...
krisso_pl Posted October 28, 2009 Author Share Posted October 28, 2009 People,pleeeease, any pics ? Link to comment Share on other sites More sharing options...
johnd-mkiv Posted October 28, 2009 Share Posted October 28, 2009 I dont have any pics of my runners I just copied a set of recaro mounts then made my own holes and brackets to attach the OMP seats. The brackets picked up from the four origional seat mounds on the floor and one on the gearbox tunnel. Link to comment Share on other sites More sharing options...
paul mac Posted October 28, 2009 Share Posted October 28, 2009 People,pleeeease, any pics ? these are some pics i took for another member on here. Cobra subframes, not a fantastic fit (but they may have soughted that now) they are not expensive but quite heavy until i got the hacksaw and drill to them Link to comment Share on other sites More sharing options...
krisso_pl Posted November 3, 2009 Author Share Posted November 3, 2009 Do Cobra and corbeau have same mounting pattern? (recliners not side mounted) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now