jackso11 Posted October 25, 2009 Share Posted October 25, 2009 Been reading a lot of posts on overfenders today, and looking at a lot of pictures. Some of the over fenders look nice, not adding that much width to the car, others look huge and look like VW beetle overfenders. I know VS do them, but do they do them in different sizes for the supra? Interested in finding out because I want the nice looking ones, like PABS and HECKLER's Also, do you have to go 10" wheel or will a 9.5" with 35 offset be ok? I like Jade-R black wheels and don't think they come in 10". Quote Link to comment Share on other sites More sharing options...
jazz1 Posted October 25, 2009 Share Posted October 25, 2009 Veilside overfenders make the car look too wide i had them and they looked funny from the rear end shot Quote Link to comment Share on other sites More sharing options...
tooquicktostop Posted October 25, 2009 Share Posted October 25, 2009 IMO you need the wheels to fill the overfenders, these wheels are never cheap, do you plan to change your wheels or add spacers Quote Link to comment Share on other sites More sharing options...
tooquicktostop Posted October 25, 2009 Share Posted October 25, 2009 IMO you need the wheels to fill the overfenders, these wheels are never cheap, do you plan to change your wheels or add spacers Quote Link to comment Share on other sites More sharing options...
jackso11 Posted October 25, 2009 Author Share Posted October 25, 2009 I am about to change my wheels, so thought I would get overfenders at the same time. I agree there are some that look huge and others that look much smaller....or is it just the way they are fitted? Quote Link to comment Share on other sites More sharing options...
Scott Posted October 25, 2009 Share Posted October 25, 2009 I am about to change my wheels, so thought I would get overfenders at the same time. I agree there are some that look huge and others that look much smaller....or is it just the way they are fitted? There are a few different kinds, the replica ones that were on here were much bigger than the original ones. 10" = +10 offset for them to fit properly. The more inches you add to the width the more normal offset you can get. Basically you need 12" wide wheels for a perfect fit. Pricey though. Quote Link to comment Share on other sites More sharing options...
Scott Posted October 25, 2009 Share Posted October 25, 2009 Veilside overfenders make the car look too wide i had them and they looked funny from the rear end shot Probably down to your photography skills Quote Link to comment Share on other sites More sharing options...
Ibrar Jabbar Posted October 25, 2009 Share Posted October 25, 2009 Been reading a lot of posts on overfenders today, and looking at a lot of pictures. Some of the over fenders look nice, not adding that much width to the car, others look huge and look like VW beetle overfenders. I know VS do them, but do they do them in different sizes for the supra? Interested in finding out because I want the nice looking ones, like PABS and HECKLER's Also, do you have to go 10" wheel or will a 9.5" with 35 offset be ok? I like Jade-R black wheels and don't think they come in 10". Veilside overfenders only come in one size, a 9.5" wheel with a 35mm offset will not work, I fitted 12x19's on mine see pic Quote Link to comment Share on other sites More sharing options...
jazz1 Posted October 25, 2009 Share Posted October 25, 2009 Probably down to your photography skills nah i remember my dad driving the supra whilst i followed him when i had those veilside arches on, the car just looked so fat and odd, the only look was from angles Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.