Kev.O Posted October 22, 2009 Share Posted October 22, 2009 I'm after some black anodised hose ends, like these, but as you can see in the link, they start that range at -6 Does anyone know where I can get some from? Ideally I'm after this style end, rather than the crimp style ones. TIA Quote Link to comment Share on other sites More sharing options...
hodge Posted October 23, 2009 Share Posted October 23, 2009 try speedflow kev. I get most of my bits from there. Quote Link to comment Share on other sites More sharing options...
RobSheffield Posted October 23, 2009 Share Posted October 23, 2009 Kevs link IS Speedflow. Quote Link to comment Share on other sites More sharing options...
Dnk Posted October 23, 2009 Share Posted October 23, 2009 Try having a look here Kev http://www.earls.co.uk Quote Link to comment Share on other sites More sharing options...
hodge Posted October 23, 2009 Share Posted October 23, 2009 Kevs link IS Speedflow. Didnt look at the link doh lol. Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted October 23, 2009 Share Posted October 23, 2009 (edited) Ask Fay at Speedflow if they can be got in black, she's a darling and very helpful. If not it's no big deal getting red / blue ones and having them re anodised in black if it's important to you. Edited October 23, 2009 by Chris Wilson (see edit history) Quote Link to comment Share on other sites More sharing options...
Kev.O Posted October 23, 2009 Author Share Posted October 23, 2009 Ask Fay at Speedflow if they can be got in black, she's a darling and very helpful. If not it's no big deal getting re / blue ones and having them re anodised in black if it's important to you. I will drop her an email. I've found the supplier of the fittings and acording to their website, they start the range from -4. As sad as it is, the colour is important to me. I think I need to get out a little more Quote Link to comment Share on other sites More sharing options...
Homer Posted October 23, 2009 Share Posted October 23, 2009 Thinkauto? Quote Link to comment Share on other sites More sharing options...
Kev.O Posted October 23, 2009 Author Share Posted October 23, 2009 Thinkauto? They weren't much use at all tbh Earls website was far more detailed. Thanks anyway though Quote Link to comment Share on other sites More sharing options...
Wez Posted October 23, 2009 Share Posted October 23, 2009 They weren't much use at all tbh Earls website was far more detailed. Thanks anyway though Hiya Kev, try http://www.fuelinjectorclinic.com/ me and a couple of other members got our rails and injectors from them a few weeks back. Check DanDans build thread for black adapters which they also supplied, quality seemed very good and priced well too EDIT: Ask for Jens if you do contact them Quote Link to comment Share on other sites More sharing options...
Kev.O Posted October 23, 2009 Author Share Posted October 23, 2009 Thanks Wez. I'll have to drop her an email as there isn't much on ther website. Quote Link to comment Share on other sites More sharing options...
Wez Posted October 23, 2009 Share Posted October 23, 2009 Thanks Wez. I'll have to drop her an email as there isn't much on ther website. Its a He Quote Link to comment Share on other sites More sharing options...
Kev.O Posted October 23, 2009 Author Share Posted October 23, 2009 Its a He That's what I meant Quote Link to comment Share on other sites More sharing options...
EdMorris Posted October 24, 2009 Share Posted October 24, 2009 Ask Fay at Speedflow if they can be got in black, she's a darling and very helpful. If not it's no big deal getting red / blue ones and having them re anodised in black if it's important to you. Indeed she is, got mine from her and she got them into a delivery that was coming earlier by phoning Oz direct. Very nice of her I thought. They are by far the cheapest place for these fittings, I've looked extensively (as black is important to me too ). The quality is good also. Quote Link to comment Share on other sites More sharing options...
Kev.O Posted October 24, 2009 Author Share Posted October 24, 2009 Indeed she is, got mine from her and she got them into a delivery that was coming earlier by phoning Oz direct. Very nice of her I thought. They are by far the cheapest place for these fittings, I've looked extensively (as black is important to me too ). The quality is good also. Did you manage to get -4 lines Ed? Here's the email back from Earl's: Hi Kev, The Ano-Tuff Swivel-Seal fittings start at -6. The only -4 fittings available in black are the Auto-Mate push fit fittings. These can either be crimped on to the hose or clamped with a jubilee clip. Best regards, Adam. Quote Link to comment Share on other sites More sharing options...
Kev.O Posted October 26, 2009 Author Share Posted October 26, 2009 I'm still awaiting an email back from Jens Quote Link to comment Share on other sites More sharing options...
EdMorris Posted October 27, 2009 Share Posted October 27, 2009 Did you manage to get -4 lines Ed? Here's the email back from Earl's: Ah, sorry. Didn't read that correct. Mine are -8 and -6. Quote Link to comment Share on other sites More sharing options...
Kev.O Posted October 27, 2009 Author Share Posted October 27, 2009 Ah, sorry. Didn't read that correct. Mine are -8 and -6. No worries, thanks Ed. Quote Link to comment Share on other sites More sharing options...
dandan Posted October 27, 2009 Share Posted October 27, 2009 Did you take a look at the link I sent you Kev? The Anotuff are black versions of Earl's "Swivel Seal" fittings. These ones only go down to dash 6 owing to the space taken up by the sealing arrangement inside. The cheaper fittings are the Autofit fittings which look the same but the heads can't be rotated relative to the hose once assembled. These do go down to dash 4 but they are not manufactured in a black style. Quote Link to comment Share on other sites More sharing options...
Kev.O Posted October 27, 2009 Author Share Posted October 27, 2009 I did thanks Dan. The only solution I came up with is to get the non anodised autofit ones and get them anodised black, as I really don't want the blue/red ones on show. Thanks for the link BTW Quote Link to comment Share on other sites More sharing options...
Kev.O Posted November 19, 2009 Author Share Posted November 19, 2009 I got these through from Earl's yesterday. I'm going to get the un-anodised parts done black: Quote Link to comment Share on other sites More sharing options...
MarkR Posted November 19, 2009 Share Posted November 19, 2009 Nice Kev Quote Link to comment Share on other sites More sharing options...
Kev.O Posted November 19, 2009 Author Share Posted November 19, 2009 Thanks Mark. That little lot there cost over £220. I can see why people run low cost hose everywhere! Quote Link to comment Share on other sites More sharing options...
MarkR Posted November 19, 2009 Share Posted November 19, 2009 Screw low cost Do it right. You know you'll regret it if you see those nasty low budget hoses everywhere Quote Link to comment Share on other sites More sharing options...
Kev.O Posted November 19, 2009 Author Share Posted November 19, 2009 Screw low cost Do it right. You know you'll regret it if you see those nasty low budget hoses everywhere That's exactly why I'm going down this route Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.