Homer Posted September 10, 2010 Share Posted September 10, 2010 Jesus, that's a hell of a lot of work to get ABS installed! Got to admire your dedication & persistance Link to comment Share on other sites More sharing options...
Swampy442 Posted September 10, 2010 Share Posted September 10, 2010 As Homer said, I tip my hat to you for sheer pig headedness Best of luck and I hope it works. Link to comment Share on other sites More sharing options...
mrgee2jz Posted September 10, 2010 Author Share Posted September 10, 2010 Thanks Guys, i know its LOOOOOOONG, but i had the engine out and every part i need to do it. I thought if i dont do it now, i Never will. It WILLLLLL WORK. otherwise im burning it, LOL Link to comment Share on other sites More sharing options...
bignum Posted September 10, 2010 Share Posted September 10, 2010 I have to tell you the car is more fun without abs, the thought of not knowing when you`re going to stop keeps you on the edge of your seat, i nearly slammed into the back of a gt3 at rockingham earlier this year, god knows what the guy in his 90k porker must have thought when i was mm from his bumper:) Link to comment Share on other sites More sharing options...
mrgee2jz Posted September 11, 2010 Author Share Posted September 11, 2010 Well, i know i do like my big power but i also loke to stop. Link to comment Share on other sites More sharing options...
neo2810 Posted September 11, 2010 Share Posted September 11, 2010 Errmm... You selling that Momo steering wheel? Link to comment Share on other sites More sharing options...
mrgee2jz Posted September 12, 2010 Author Share Posted September 12, 2010 Sorry, I need it to turn the wheels. Lol Link to comment Share on other sites More sharing options...
neo2810 Posted September 13, 2010 Share Posted September 13, 2010 I'll do a swap. My yellow Momo will look better in your car.... Link to comment Share on other sites More sharing options...
mrgee2jz Posted September 14, 2010 Author Share Posted September 14, 2010 Lol, thatks for the offer but I like mine Link to comment Share on other sites More sharing options...
neo2810 Posted September 14, 2010 Share Posted September 14, 2010 Lol, thatks for the offer but I like mine So do I pal, so do I... Link to comment Share on other sites More sharing options...
mrgee2jz Posted September 16, 2010 Author Share Posted September 16, 2010 Ok. Another little update, yesterday I installed the rear brake lines (from front to rear), what a pain in the ass job!!!! It took ages and the rear subframe and diff also had to come down. Interior is all back in the car and the engine will be going in today Link to comment Share on other sites More sharing options...
mrgee2jz Posted September 16, 2010 Author Share Posted September 16, 2010 ABS , what is this you speak of, next youl be asking for a traction and stability controll system. Well the entire setup is from a tt6 now so I should also have traction working, but we'll see Link to comment Share on other sites More sharing options...
mrgee2jz Posted November 2, 2010 Author Share Posted November 2, 2010 OK, ABS is fully working now, but for some reason i have absolutely no Traction light nor is traction control working, maybe i need a relay somewhere? or dash loom is different??? Link to comment Share on other sites More sharing options...
mrgee2jz Posted November 2, 2010 Author Share Posted November 2, 2010 I wouldnt mind knowing the results if you do decide to go down this route! Does anybody know if the abs wiring is already built into the car looms, and is it just a case of buying pipes, hubs, sensors, pump etc? The answer is NO, the wiring is not already in the car, you may have a bit of wire with 1 connector plug on the end but its not conneected into the main loom, so if you want abs it means completely re-wiring the entire car, and then change all the hubs, pipes pump, basically everything! I just did it, and now i have ABS, and it works Link to comment Share on other sites More sharing options...
imi Posted November 2, 2010 Share Posted November 2, 2010 impressed with your perseverance and your skills. Link to comment Share on other sites More sharing options...
mrgee2jz Posted November 14, 2010 Author Share Posted November 14, 2010 impressed with your perseverance and your skills. Thanks mate, not sure i would do it again though, unless im already stripping the shell to the bone! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now