Guest George89 Posted October 7, 2009 Share Posted October 7, 2009 Hi i have 2 pot calipers at front and 1 pot at rear i am wondering would it be alride if i change the 1 pod at rear and added 2 pot calipers? is what possible to get 2 pot fronts and put them in the rear? and in future i will change front to 4 pot Quote Link to comment Share on other sites More sharing options...
Scott Posted October 8, 2009 Share Posted October 8, 2009 You could do but it could potentially mess with the balance of the car. You want there to be slightly more force being applied to the fronts. If you get more force on the rears the car will swap ends. Quote Link to comment Share on other sites More sharing options...
Nic Posted October 8, 2009 Share Posted October 8, 2009 (edited) You'll completely mess up the front/rear brake balance. If you want better braking invest in some good quality pads, some stainless steel braided brake lines and some decent brake fluid. A brace for the brake master cylinder would also help minimise flex and firm up the pedal feel. Cusco Brake Master Cylinder Brace http://img210.imageshack.us/img210/7042/attachmentphpib1.jpg http://img208.imageshack.us/img208/3512/attachment1phpud4.jpg http://img210.imageshack.us/img210/6375/attachment2phpsw6.jpg Carbing Tower Bar with Built in BMC brace http://img137.imageshack.us/img137/4341/attachmentphpgr9.jpg http://img46.imageshack.us/img46/2775/attachment1phpdh1.jpg Edited October 8, 2009 by Nic (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.