dani_r Posted October 1, 2009 Share Posted October 1, 2009 Can anyone identify this part? My passenger side headlight has always been out of alignment, and I just figured it was because of a bit of bumper bend causing it to push the headlight up slightly. If you look at the underneath of the pax side headlight closely and compare it to the other side you can see that the bumper and headlight are pushed up slightly at the area near the main beam. But whilst I had the headlights out the other day I had a good poke around and noticed this! It looks like something attached to the front crash bar? Compared to the other side, it's clearly had a bash and is bent a little bit. More to the point, can this be replaced? I've had a poke around and it looks like it bolts to the crash bar and a few other places? Cheers Dan Quote Link to comment Share on other sites More sharing options...
Dave Posted October 1, 2009 Share Posted October 1, 2009 i think this comes off when you remove the bumper so you must be able to replace it but dont quote me you need someone like jezz to tell you Quote Link to comment Share on other sites More sharing options...
SupraShaun Posted October 1, 2009 Share Posted October 1, 2009 Its looks like it can be replaced, have a look here: http://www.toyodiy.com/parts/p_J_1994_TOYOTA_SUPRA_JZA80-ALFQZ_5201.html Quote Link to comment Share on other sites More sharing options...
Dave Posted October 1, 2009 Share Posted October 1, 2009 check this out now it looks like its attached to the car Quote Link to comment Share on other sites More sharing options...
Kirk Posted October 1, 2009 Share Posted October 1, 2009 its your headlamp/bumper support panel! mine is also very bent and in need of replacement! its a bolt on panel so easy to replace Quote Link to comment Share on other sites More sharing options...
dani_r Posted October 1, 2009 Author Share Posted October 1, 2009 (edited) Its looks like it can be replaced, have a look here: http://www.toyodiy.com/parts/p_J_1994_TOYOTA_SUPRA_JZA80-ALFQZ_5201.html Just to check, it's this part? The most annoying thing about Toyodiy is that I can't figure out how to zoom in on the image! (unless you know how?) its your headlamp/bumper support panel! mine is also very bent and in need of replacement! its a bolt on panel so easy to replace Nice one Now, any ideas where to get one? Mr.T is the obvious choice, but that may prove to be costly! Edited October 1, 2009 by dani_r (see edit history) Quote Link to comment Share on other sites More sharing options...
Kirk Posted October 1, 2009 Share Posted October 1, 2009 keron.... and whilst your there get me 1 Quote Link to comment Share on other sites More sharing options...
dani_r Posted October 1, 2009 Author Share Posted October 1, 2009 keron.... and whilst your there get me 1 I'll see what I can do! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.