James Posted September 1, 2010 Share Posted September 1, 2010 http://www.demisterman.co.uk/Toyota/Toyota%20Supra%20Mk4%201993-98%20heater%20matrix.php There you go. Best price. That's the one I just replaced my knackered one with. Quote Link to comment Share on other sites More sharing options...
supra matt Posted September 1, 2010 Author Share Posted September 1, 2010 nice one mate ill get one of them on order now:) Quote Link to comment Share on other sites More sharing options...
evinX Posted September 1, 2010 Share Posted September 1, 2010 http://www.demisterman.co.uk/Toyota/Toyota%20Supra%20Mk4%201993-98%20heater%20matrix.php There you go. Best price. That's the one I just replaced my knackered one with. Wow thats a good price! wernt they like £100 or £300 from toyota direct a while back? if i had the spare ££ id get one to keep ready for when mine goes, as it probably will:D Quote Link to comment Share on other sites More sharing options...
James Posted September 1, 2010 Share Posted September 1, 2010 Yeah they're £300 or so from Toyota. Labour was quoted at something like £900 as well. Instead, I got one from that site and then did it myself. £1129 saved. Woop! Quote Link to comment Share on other sites More sharing options...
evinX Posted September 1, 2010 Share Posted September 1, 2010 Yea man, thats a sodding good price, get a group buy going, im sure people will snap these up:) Quote Link to comment Share on other sites More sharing options...
supra matt Posted September 2, 2010 Author Share Posted September 2, 2010 doute they will drop the price as there already dirt cheap Quote Link to comment Share on other sites More sharing options...
monsween Posted September 2, 2010 Share Posted September 2, 2010 Yea man, thats a sodding good price, get a group buy going, im sure people will snap these up:) You really are on a shoestring you cheap cnut Quote Link to comment Share on other sites More sharing options...
supra matt Posted September 2, 2010 Author Share Posted September 2, 2010 small up date picked my head up from dude tonight was a bit of a nightmare apparently (sorry dude ) j-spec with 264 cams should help my top end out:D Quote Link to comment Share on other sites More sharing options...
Blackie Posted September 3, 2010 Share Posted September 3, 2010 (edited) You really are on a shoestring you cheap cnut You didnt have to call him cheap mate The handles are a really nice mod mate. Edited September 3, 2010 by Blackie (see edit history) Quote Link to comment Share on other sites More sharing options...
supra matt Posted September 5, 2010 Author Share Posted September 5, 2010 You didnt have to call him cheap mate The handles are a really nice mod mate. thanks mate well small update guide coated the hole car the sanded it back with a long block to make sure all the panels are straight and fill any small imperfections (well the girlfriend resanded the car ) while i cracked on with removing the rear break light and re-bonding the rear spats and bumper , his the progress ( not to long and its primer time ) Also got the handle working then give it a nice drop of silver hamirite to protect it Quote Link to comment Share on other sites More sharing options...
brettjones Posted September 5, 2010 Share Posted September 5, 2010 thanks mate loving the mod on the handles after seeing how you did it i may have a go on my sup but dont wont to nick your idea and thank you for letting me have a play with the sander see you saturday for my next lesson;) Quote Link to comment Share on other sites More sharing options...
supra matt Posted September 5, 2010 Author Share Posted September 5, 2010 no worrys mate see you Saturday;) Quote Link to comment Share on other sites More sharing options...
JamieP Posted September 5, 2010 Share Posted September 5, 2010 Why was the head a nightmare matt? what did you have done? Quote Link to comment Share on other sites More sharing options...
supra matt Posted September 5, 2010 Author Share Posted September 5, 2010 cos the 264 cams had to be fitted and as dude was doing it as a favour he did not wont to get new shims so he had to surface grind all the old shims to fit. which took two days and lost of messing about . Quote Link to comment Share on other sites More sharing options...
JamieP Posted September 5, 2010 Share Posted September 5, 2010 cos the 264 cams had to be fitted and as dude was doing it as a favour he did not wont to get new shims so he had to surface grind all the old shims to fit. which took two days and lost of messing about . Never heard of that before, must be some specialst tool i guess. Quote Link to comment Share on other sites More sharing options...
supra matt Posted September 5, 2010 Author Share Posted September 5, 2010 (edited) ya old school got a magnet base that holds the in place than a grinder wheel thats runs across the top them taking off a small amount each time but you have to keep checking them all the time thats why it takes so long . Edited September 5, 2010 by supra matt (see edit history) Quote Link to comment Share on other sites More sharing options...
supra matt Posted September 13, 2010 Author Share Posted September 13, 2010 not a great deal done this week got both handles in and working , and did a bit more stripping out , full air bag set up , abs , rear seat belts , Toyota jack and tools , and cruise control Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted September 13, 2010 Share Posted September 13, 2010 honda del sol door handles? Quote Link to comment Share on other sites More sharing options...
Guest clive Posted January 3, 2011 Share Posted January 3, 2011 Any up dates on this Matt? Quote Link to comment Share on other sites More sharing options...
marcAB10 Posted January 3, 2011 Share Posted January 3, 2011 honda del sol door handles? i knew that as soon as i seen them too, used to own one. although i think some civics of that age (eg?) had the same type. i have to say.. i kinda prefer the stock supra ones though. Quote Link to comment Share on other sites More sharing options...
supra matt Posted January 3, 2011 Author Share Posted January 3, 2011 Got a small update to come not done to much on it over the last fue weeks but will post pic of what I've done tomorrow:-) . Jobs I've done removed the auto tunnel in preparation for fitting the 6 speed , finished all the sanding on all the small fiddly bits and all the bonding on the kit is all done now hope to give it a squirt of primer next weekend , also sent my wheels away to be powered coated should be back next week , they won't be to everyones liking but I think they will finish the car off . Pic tomorrow . Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted January 3, 2011 Share Posted January 3, 2011 i knew that as soon as i seen them too, used to own one. although i think some civics of that age (eg?) had the same type. i have to say.. i kinda prefer the stock supra ones though. i had one too won many shows with it, loved it too bits. good luck with the build mate by the way Quote Link to comment Share on other sites More sharing options...
Guest clive Posted January 3, 2011 Share Posted January 3, 2011 Got a small update to come not done to much on it over the last few weeks but will post pic of what I've done tomorrow:-) . Jobs I've done removed the auto tunnel in preparation for fitting the 6 speed , finished all the sanding on all the small fiddly bits and all the bonding on the kit is all done now hope to give it a squirt of primer next weekend , also sent my wheels away to be powered coated should be back next week , they won't be to everyones liking but I think they will finish the car off . Pic tomorrow . its few weeks about time too my matey!! Need to catch up soon dude, my s14 has gone... http://www.driftworks.com/forum/drift-cars-sale-private-sales/128831-drift-ready-s14-kitted-coilovers-dw-alignment-arms-stage-1a-looking-swaps.html straight swapped with the wheels on it with a slightly poorly skyline... running tip top now: http://www.hampshirejapcars.co.uk/portal/showthread.php?t=20283 Quote Link to comment Share on other sites More sharing options...
supra matt Posted January 4, 2011 Author Share Posted January 4, 2011 (edited) well here are the pics of what i've done , i have also removed all the factory sound deadening as im going to fatmatt the the hole car front to back. Edited January 4, 2011 by supra matt (see edit history) Quote Link to comment Share on other sites More sharing options...
supra matt Posted January 4, 2011 Author Share Posted January 4, 2011 its few weeks about time too my matey!! Need to catch up soon dude, my s14 has gone... http://www.driftworks.com/forum/drift-cars-sale-private-sales/128831-drift-ready-s14-kitted-coilovers-dw-alignment-arms-stage-1a-looking-swaps.html straight swapped with the wheels on it with a slightly poorly skyline... running tip top now: http://www.hampshirejapcars.co.uk/portal/showthread.php?t=20283 very nice mate how come you let the 200 go? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.