Ricky49 Posted September 22, 2009 Share Posted September 22, 2009 (edited) Been wanting to go single for a while now and finally stopped pussy footing around and started ordering some parts today. Todays order Greedy intake manifold with relevent parts required Sard 800cc drop in fuel injecters Bosch fuel pump Fuel dampner line NGK iridium plugs grade 8 Stage 3 RPS clutch with street disc Tein front strut brace HKS turbo kit (without a turbo) Borg Warner S366 0.83A/R Q45 throttle body Solaris ecu Turbo blanket Also a bit of engine dress blingy things Edited April 12, 2010 by Ricky49 (see edit history) Link to comment Share on other sites More sharing options...
Ricky49 Posted September 22, 2009 Author Share Posted September 22, 2009 Ordered some PARTS I think I mean Link to comment Share on other sites More sharing options...
Geo Posted September 22, 2009 Share Posted September 22, 2009 And so it Begins, he he. Prepare for all the niggly bits that add up to the Cost of the build dude. Nice Spec all the same. Are you doing a Build Thread?? Link to comment Share on other sites More sharing options...
JamieP Posted September 22, 2009 Share Posted September 22, 2009 Nice one mate, what sort of power are you looking for? Stock rad will be fine if in decent condition. Water/meth kit is not really needed either if you want to save a few bob, i dont ever use mine. Link to comment Share on other sites More sharing options...
Ricky49 Posted September 22, 2009 Author Share Posted September 22, 2009 It's going to take a while for me to get the rest of the bits together but when I do I'll do a build thread. Link to comment Share on other sites More sharing options...
JamieP Posted September 22, 2009 Share Posted September 22, 2009 Oh and you dont need a hks dli if going with a solaris ecu;) Link to comment Share on other sites More sharing options...
Ricky49 Posted September 22, 2009 Author Share Posted September 22, 2009 Alrite Jamie. Around 600ish hopefully a bit more is possible. I was looking at the TO4Z but Im unsure at the moment. It's very unlikely I'd want any for power but if I got a turbo that has a bit of reserve just in case. Link to comment Share on other sites More sharing options...
Ricky49 Posted September 22, 2009 Author Share Posted September 22, 2009 I'll be cancelling that in the morning then. Cheers Jamie Link to comment Share on other sites More sharing options...
JamieP Posted September 22, 2009 Share Posted September 22, 2009 T04z will do the job mate, are your sard injectors high imp? if not then you will also need a resistor pack. Link to comment Share on other sites More sharing options...
Ricky49 Posted September 22, 2009 Author Share Posted September 22, 2009 Yeah I think they said they were high impedance. They never mentioned I'd need a resister pack. Link to comment Share on other sites More sharing options...
Ricky49 Posted September 22, 2009 Author Share Posted September 22, 2009 Yeah I think they said they were high impedance. They never mentioned I'd need a resister pack. Link to comment Share on other sites More sharing options...
SteveR Posted September 22, 2009 Share Posted September 22, 2009 Ordered some PARTS I think I mean fixed Have you chosen a mapper yet? Link to comment Share on other sites More sharing options...
Ricky49 Posted September 22, 2009 Author Share Posted September 22, 2009 (edited) Mr Ryan G I think if he has the time and wants to do it. Cheers for the fix Edited September 22, 2009 by Ricky49 (see edit history) Link to comment Share on other sites More sharing options...
SteveR Posted September 22, 2009 Share Posted September 22, 2009 Mr Ryan G I think if he has the time and wants to do it. Might be worth speaking to him before you order too many bits, as your mapper (as part of their service) really should be on hand to help guide you as to the best choices for your needs and the least painful way of going about it. Link to comment Share on other sites More sharing options...
Ricky49 Posted September 22, 2009 Author Share Posted September 22, 2009 Ok cheers will do. Been talking things through with LeeP aswell Link to comment Share on other sites More sharing options...
Paul Whiffin Posted September 22, 2009 Share Posted September 22, 2009 Yep, as Jamie says you wont need the DLi or the water injection kit, spend it on other stuff! I can do a TO4Z kit now just in case you haven't seen it. Link to comment Share on other sites More sharing options...
Ricky49 Posted September 22, 2009 Author Share Posted September 22, 2009 Is there anything else I should be thinking of or anything anyone could recommend I should get. Link to comment Share on other sites More sharing options...
JamieP Posted September 22, 2009 Share Posted September 22, 2009 Decent brakes:D Link to comment Share on other sites More sharing options...
Ricky49 Posted September 22, 2009 Author Share Posted September 22, 2009 Im not in the brembo pr AP racing league I thought UK brakes were pretty good I take it not for 600 horses. Link to comment Share on other sites More sharing options...
JamieP Posted September 22, 2009 Share Posted September 22, 2009 Good condition UK brakes will be spot on mate. Link to comment Share on other sites More sharing options...
Paul Whiffin Posted September 22, 2009 Share Posted September 22, 2009 Im not in the brembo pr AP racing league I thought UK brakes were pretty good I take it not for 600 horses. They'll be ok with uprated pads/hoses/fluid, you still dont get the pedal feel/confidence of the big brake upgrades though. Link to comment Share on other sites More sharing options...
Paul Whiffin Posted September 22, 2009 Share Posted September 22, 2009 Is there anything else I should be thinking of or anything anyone could recommend I should get. Oil cooler Catch tank I'm sure theres some more stuff! Link to comment Share on other sites More sharing options...
SteveR Posted September 22, 2009 Share Posted September 22, 2009 (forget it, it's been said by Paul!) Link to comment Share on other sites More sharing options...
Ricky49 Posted September 22, 2009 Author Share Posted September 22, 2009 I have those Poterfielsd pads on from you Paul, goodridge braided lines. Who needs to stop anyway . Is an oil catch tank necessary I have been told there is another way of doing it. ( Dont ask me how ). Link to comment Share on other sites More sharing options...
Paul Whiffin Posted September 22, 2009 Share Posted September 22, 2009 I have those Poterfielsd pads on from you Paul, goodridge braided lines. Who needs to stop anyway . Is an oil catch tank necessary I have been told there is another way of doing it. ( Dont ask me how ). You'd be suprised how good the big brakes are like Brembo/AP, its honestly one of the best mods you can do. Catch tank wise, you can plumb it back in to the air filter pipe, personally I wouldn't do it like that. All that hot air and oily crap going back into your air intake/engine, not the best. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now