adam82 Posted September 15, 2009 Share Posted September 15, 2009 Hi, My clutch needs replacing on my NA/TT and I was wondering if I would get away with a RPS clutch with 300lb/ft torque capacity or would I need the next clutch up with 380lb/ft. Car does have 3" 2nd decat system FMS but other than that is pretty standard. Running W58 box. Thanks for any advice. Link to comment Share on other sites More sharing options...
dcarrter21 Posted September 15, 2009 Share Posted September 15, 2009 what did you have before? im running a na clutch and ive done a drift day plus i dont treat it very nice.....still going strong..... the rps units were quite alot at the time Link to comment Share on other sites More sharing options...
adam82 Posted September 15, 2009 Author Share Posted September 15, 2009 Well I was told it was some unknown type of EXEDY clutch before... Link to comment Share on other sites More sharing options...
adam82 Posted September 15, 2009 Author Share Posted September 15, 2009 Just looking at your car and is that not a 6 speed with the turbo clutch then? Mine is 5 speed you see so probably a wimpier clutch. Link to comment Share on other sites More sharing options...
dcarrter21 Posted September 15, 2009 Share Posted September 15, 2009 no mines a tt 5spd. standard na clutch and flywheel Link to comment Share on other sites More sharing options...
nero Posted September 15, 2009 Share Posted September 15, 2009 If you have a NA trans with a TT engine then I'd go with this clutch assuming your going to keep the stock twins for a while. By RPS Supra NA '93+ MS-22522-ST MAX Series clutch with a Street disc. Stock + 25% 440 lb-ft Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now