Lurch Posted September 7, 2009 Share Posted September 7, 2009 (edited) Hello, I've got these bucket seats in my car.. and was wondering if 1. I can put harnesses on them and 2. Can I get lower sub frames for them... One more question... What can I do about my brake discs? they are new as you can see and looked good before they started to rust. How can I stop this from happening? Can I paint them? (I know the disc grooves are the wrong way round, I bought it like it will change them around when I de rust them) Edited September 7, 2009 by Lurch (see edit history) Link to comment Share on other sites More sharing options...
merckx Posted September 7, 2009 Share Posted September 7, 2009 One more question... What can I do about my brake discs? they are new as you can see and looked good before they started to rust. How can I stop this from happening? Can I paint them? I painted the bell part of the disc with Hammerite barbecue paint in matt black - they look stupid if painted with gloss paint. http://www.halfords.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10151&storeId=10001&partNumber=363754&langId=-1&cm_mmc=Googlebase-_-Body%20Repair/Other%20Paints-_-Na-_-Hammerite%20Barbecue%20Paint%20Aerosol%20400ml&%24%24tid=8tZtg-gwS4MOVvVYsYU9W3LPKZWlgI_DkFEJ7UuMDPv63yDozmB83YzONbUv77PN Link to comment Share on other sites More sharing options...
Lurch Posted September 7, 2009 Author Share Posted September 7, 2009 Have you got any photos? Might be too much black on my car? Link to comment Share on other sites More sharing options...
merckx Posted September 7, 2009 Share Posted September 7, 2009 Have you got any photos? Might be too much black on my car? Don't say you're going to pant them bright red or silver. Link to comment Share on other sites More sharing options...
Lurch Posted September 7, 2009 Author Share Posted September 7, 2009 No no no. Wanted more of a colour like the colour they are now minus the rust. I dunno black might be ok? Link to comment Share on other sites More sharing options...
paul mac Posted September 7, 2009 Share Posted September 7, 2009 the sub frames that you have look like Cobra ones, these are about as low as you can get without bolting it direct to the floor, you can use harness's ideally you would need a harness bar or you could use the rear seat belt anchor point, dont use any of the front seat anchor points as this is dangerous Link to comment Share on other sites More sharing options...
gaijin Posted September 7, 2009 Share Posted September 7, 2009 Did my hubs with BBQ satin black paint.Look fine. Link to comment Share on other sites More sharing options...
Lurch Posted September 8, 2009 Author Share Posted September 8, 2009 Where abouts would a harness bar go? I want to keep the back seats for my son... Ineed to do something though as the seats are so tight against the buckle that its a nightmare to undo them. Have you got and photos? Link to comment Share on other sites More sharing options...
paul mac Posted September 8, 2009 Share Posted September 8, 2009 Where abouts would a harness bar go? I want to keep the back seats for my son... Ineed to do something though as the seats are so tight against the buckle that its a nightmare to undo them. Have you got and photos? i dont think you can use a harness bar and still retain the use of the rear seats Link to comment Share on other sites More sharing options...
Lurch Posted September 9, 2009 Author Share Posted September 9, 2009 O right. Thats a shame. It is really tight where the buckle is. Its a nightmare to undo, thats why I thought about harnesses Link to comment Share on other sites More sharing options...
kslb Posted September 9, 2009 Share Posted September 9, 2009 Matt black is the only way to go and as stated BBQ paint is the way ahead, anything else will just divert attention from your nice rims and look weird. Pic not great but you get the idea. Link to comment Share on other sites More sharing options...
Lurch Posted September 9, 2009 Author Share Posted September 9, 2009 Thank you, that looks fine, thats what I shall do. How do you prep it? Nice Supra btw Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 9, 2009 Share Posted September 9, 2009 Seeing as the discs are practically new I'd say a rub with a wire brush or wire wool and then clean them with a bit of metheylated spirits or thinners. Hammerite paints have their own specific thinners for actually thinning the paint but I'd imagine ordinary thinners is acceptable for cleaning the parts. Then just mask off the swept area of the disc although I'd be painting the grooves also which would make the masking a tad more fiddly. Link to comment Share on other sites More sharing options...
pbryant_knight Posted September 9, 2009 Share Posted September 9, 2009 I used hammerite Direct to metal paint on mine (did them red though). means you need to do minimal prep work, just get rid of the loose rust. Peter Link to comment Share on other sites More sharing options...
Lurch Posted September 9, 2009 Author Share Posted September 9, 2009 ok thanks. I shall give it a go at the weekend if I get time. I think blue calipers with white supra sign as well to match the writing on the wheels? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now