Homer Posted September 4, 2009 Share Posted September 4, 2009 Having a bit of brain fade, what is missing from the circled part? Is there some sort of retaining clip to keep the line in it's place? I couldn't find a part on EPC for this... Quote Link to comment Share on other sites More sharing options...
simbasupra Posted September 4, 2009 Share Posted September 4, 2009 Yep, its like a U shaped clip that slides in. You can kind of see it in this: http://www.lextreme.com/suprabrakeupgrade.html Quote Link to comment Share on other sites More sharing options...
Andy Blyth Posted September 4, 2009 Share Posted September 4, 2009 There should be a circular 'E' shaped clip on one side and an 'L' shaped prism with a 'U' cutout on the other. Part numbers shown here. Quote Link to comment Share on other sites More sharing options...
Homer Posted September 4, 2009 Author Share Posted September 4, 2009 Thanks mate, that looks like the bit I was expecting Does anyone have a part number for this? I still can't locate it on EPC.. EDIT - Thanks Andy, just the job Quote Link to comment Share on other sites More sharing options...
AlexM Posted September 4, 2009 Share Posted September 4, 2009 That shock looks lovely Homer, cost you much? Quote Link to comment Share on other sites More sharing options...
Andy Blyth Posted September 4, 2009 Share Posted September 4, 2009 Have you got a higher resolution version of your photo? I can't tell for sure, but it looks like you may have both clips attached to your brake hose already. Quote Link to comment Share on other sites More sharing options...
Homer Posted September 4, 2009 Author Share Posted September 4, 2009 That shock looks lovely Homer, cost you much? It's a bit rusty isn't it Came with the car, which was free, so can't really complain! Quote Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 4, 2009 Share Posted September 4, 2009 Is there is a small 'C' shaped spring clip missing Homer? Quote Link to comment Share on other sites More sharing options...
Homer Posted September 4, 2009 Author Share Posted September 4, 2009 Have you got a higher resolution version of your photo? I can't tell for sure, but it looks like you may have both clips attached to your brake hose already. That's about as high a resolution as the phone cam goes, I think there's only one clip on there but will take a closer look tomorrow Quote Link to comment Share on other sites More sharing options...
Miguel Posted September 5, 2009 Share Posted September 5, 2009 (edited) Brake Clips Part No:90468‑08035 Standard Part. Secondary Rear Clip Part No: 90523‑12004 Standard Part. Edited September 5, 2009 by Miguel (see edit history) Quote Link to comment Share on other sites More sharing options...
Scott Posted September 5, 2009 Share Posted September 5, 2009 Homer, Going by the picture i would say both clips are on it and it just hasn't been fitted correctly. There should be a clip on the bottom and one on the top. The one on the top is like a c-clip with a couple of inner edges on it to take hold. On the bottom should be the one being shown to you from all the IPC reply's. Going by your pic they are both there, i'm positive i can see the L-Shaped one (for pulling out with pliars) so it appears they just haven't been fitted correctly. Strangely the IPC doesn't show both clips for the front, only for the rear. My car had both clips on the front and the rear. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.