SUPRALOOPY Posted September 9, 2009 Author Share Posted September 9, 2009 Thanks mate:( Link to comment Share on other sites More sharing options...
dani_r Posted September 9, 2009 Share Posted September 9, 2009 oh and don't then ram it into a tree at XX leptons as I did. I thought we weren't supposed to talk about that Dave? Link to comment Share on other sites More sharing options...
jazz1 Posted September 9, 2009 Share Posted September 9, 2009 Thats bad and like stated mines all genuine kit and i have to say 98% was perfect fitment Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted September 10, 2009 Author Share Posted September 10, 2009 I now have sides done and will be taking them off to paint the bits that will not get painted when fitted and moulded to the car. I test fitted the lights and had to adjust the bumper for easy removal, another tip for all doing this themselves make sure everything fits and you are happy before painting even if it seems like alot of hassel to keep putting the stuff on and then removing it again. I wanted to get it all in primer before JAE (the pics are for photo purposes) so it was like concrete for when I got back. For all those going to JAE I'll see you there and try not to talk work to me please;) Link to comment Share on other sites More sharing options...
Fitz Posted September 10, 2009 Share Posted September 10, 2009 Cracking job so Far Dave! Have fun at JAE!! Link to comment Share on other sites More sharing options...
pistonbroke Posted September 10, 2009 Share Posted September 10, 2009 OMG, I had a little sex wee of excitment seeing the front end with lights in, then the side skirts sitting so straight. You're a legend Mr Whittle.............a damn legend I tell thee!! Link to comment Share on other sites More sharing options...
pistonbroke Posted September 10, 2009 Share Posted September 10, 2009 Just to check Dave, I see you've got everything out for primering (is that a word?), but I don't spot the TRD spoiler side bits. Have you forgotten them? Link to comment Share on other sites More sharing options...
Fitz Posted September 10, 2009 Share Posted September 10, 2009 That's because I stole them... Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted September 10, 2009 Author Share Posted September 10, 2009 The TRD bits are already primed I hope. Deans were. If not then I'll do them whilst spending hours flatting the bumper and stuff. Link to comment Share on other sites More sharing options...
Jamesy Posted September 10, 2009 Share Posted September 10, 2009 Wow top work mate thats looking great !! Link to comment Share on other sites More sharing options...
pistonbroke Posted September 10, 2009 Share Posted September 10, 2009 The TRD bits are already primed I hope. Deans were. If not then I'll do them whilst spending hours flatting the bumper and stuff. You're probably right mate, have a good weekend buddy. Enjoy JAE Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted September 10, 2009 Author Share Posted September 10, 2009 Ok thats it peeps. I am now off to bed and will be comatose for the next two days. I will no doubt make a pratt of myself but hey thats what JAE is about. See you all monday when I put up the I have painted Dans car pink thread. Link to comment Share on other sites More sharing options...
T2 MSW Posted September 10, 2009 Share Posted September 10, 2009 Looks ace dave great work look forward to the "entertainment" at JAE Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted September 14, 2009 Author Share Posted September 14, 2009 Today I was flatting primer down with 800 w&d. Do you really want pics??? Link to comment Share on other sites More sharing options...
pistonbroke Posted September 14, 2009 Share Posted September 14, 2009 Lol, no that's fine Dave Link to comment Share on other sites More sharing options...
pistonbroke Posted September 14, 2009 Share Posted September 14, 2009 Do you want me to get some new number plates to you Dave, or are you able to source them? Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted September 14, 2009 Author Share Posted September 14, 2009 I'll sort the plates I get them cheaper. Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted September 14, 2009 Author Share Posted September 14, 2009 Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted September 16, 2009 Author Share Posted September 16, 2009 After flatting the rear bumper and spats I started on the front bumper and I finished the prep today so thought I'd paint them too. Its then the nice job of flatting and polishing it all:rolleyes: I will then start the sides of the car as I have no room atm:D Link to comment Share on other sites More sharing options...
Jamesy Posted September 16, 2009 Share Posted September 16, 2009 wow Link to comment Share on other sites More sharing options...
hoff Posted September 16, 2009 Share Posted September 16, 2009 Excellant work Dave. God I wish you owed me a massive favour:d Link to comment Share on other sites More sharing options...
tooquicktostop Posted September 16, 2009 Share Posted September 16, 2009 Looking like the usual quality Dave, superb, it is a shame you dont continue to offer this service, perhaps you should and just make the cost worth while to yourself, if you want quality you will be willing to pay ? Link to comment Share on other sites More sharing options...
hiten55 Posted September 16, 2009 Share Posted September 16, 2009 wow good work dave Link to comment Share on other sites More sharing options...
pistonbroke Posted September 16, 2009 Share Posted September 16, 2009 Oh, my, god!!! That looks amazing. Great work Dave Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted September 16, 2009 Author Share Posted September 16, 2009 (edited) Looking like the usual quality Dave, superb, it is a shame you dont continue to offer this service, perhaps you should and just make the cost worth while to yourself, if you want quality you will be willing to pay ? This is why I will always be skint:( I just can't do the fook people over thing. I know I need to charge but I'm never happy with my work so charge accordingly and that = you win I lose. If you knew the stress these jobs put you under you would not do them, one thing goes wrong and its now costing you money to put right (oh and something always goes wrong) I may well still do this but I don't think people will pay for the hours I spend TBH:) I am working out a list of prices for things like dash paints and headlight refurbs so watch my traders area BTW whilst painting all this I had Jamesy.W texting me sick jokes to put me off. (Thanks mate) Edited September 16, 2009 by SUPRALOOPY (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now