Paul372 Posted August 6, 2009 Share Posted August 6, 2009 Hi, want to change the bearing on the pully for the air con pump because its making a noise, so i've stripped it down and now just need to find where i can buy a new bearing from, where can i get this type of bearing from and how much do you think it will cost, cheers Quote Link to comment Share on other sites More sharing options...
Digsy Posted August 6, 2009 Share Posted August 6, 2009 Unless it is some kind of bonkers special part bearings are usually standard sizes. The basic designation will probably be stamped on the outer race. Then there will be options for seal type (rubber or metal - obvious from looking at it) and materials, internal clearances, etc (less likely to be stamped on the part and impossible to tell just by looking). Assuming the bearing is a relatively standard design (metal balls, standard clearance) then you should just be able to take it to a bearing supplier and they should have a relpacement off the shelf. Quote Link to comment Share on other sites More sharing options...
ronttuk Posted August 6, 2009 Share Posted August 6, 2009 http://www.brammer.co.uk/default.aspx BSL Ltd Burnt Ash Road Aylesford Kent ME20 7XB 01622 715181 hope this helps Quote Link to comment Share on other sites More sharing options...
Paul372 Posted August 7, 2009 Author Share Posted August 7, 2009 thanks guys i will try them Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.