Mike B Posted July 26, 2009 Share Posted July 26, 2009 Due to time (or lack thereof) and a current change in life situation I never got round to fitting or using this, and now feel the need to sell it! I have put it up on ebay as auction and by it now.. Looking for £275, they are £320+ in the UK ebay link; http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=160351494306&ssPageName=STRK:MESE:IT Here is the info from LM2; http://www.innovatemotorsports.com/products/lm2.php LM-2: Digital Air/Fuel Ratio Meter The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s award-winning digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. * Patented “Direct Digital” Wideband Technology * Wideband O2 Compatible with ALL fuel types * Single or Dual Channel Version Available * OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data * Log directly to SD card (included) * Playback log data on screen and/or with powerful LogWorks software (included) * Large high-contrast graphics LCD * Built-in RPM converter (direct frequency or with optional inductive clamp) * 4 fully-differential analog inputs * 2 configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user. Link to comment Share on other sites More sharing options...
michel lane Posted July 27, 2009 Share Posted July 27, 2009 you are alive !!! where you been ? Link to comment Share on other sites More sharing options...
kieren1234 Posted July 27, 2009 Share Posted July 27, 2009 This is an absolutely amazing piece of kit. I had the Lm-1 which was brilliant and this one offers alot more than that. Good luck with the sale, at that price i cannot see it staying around for long. Link to comment Share on other sites More sharing options...
Recommended Posts