Geo Posted July 25, 2009 Share Posted July 25, 2009 XS Power T70 Single turbo XS Power Manifold with good internal welds (see pics) 3 Inch Stainless Steel Xs-Power Downpipe 50mm Xs-Power Wastegate Screamer pipe for Wastegate All has done about 6000 miles guys, and has been only Run at 0.5 bar of boost. Iv checked out the turbo guys NO play at all, manifold just needs a clean, all welds are good to go. No cracks at all. Turbo -T-3 Flange 3” V-Band Inlet (compressor/cold side)Ø 102mm Outlet (compressor/cold side)(4”)Ø 65mm (2.5”)Exducer A/R 0.84 Compressor Style 0.70 Compressor major diameter Ø 84 mm Pic of the setup installed Wont split goes as One Kit Looking for £280ono guys. Link to comment Share on other sites More sharing options...
Scott Posted July 25, 2009 Share Posted July 25, 2009 You missing a zero? Link to comment Share on other sites More sharing options...
tony tt Posted July 25, 2009 Share Posted July 25, 2009 I think he must be some how!! Link to comment Share on other sites More sharing options...
trinitom Posted July 25, 2009 Share Posted July 25, 2009 if it is £280 1st dibs Link to comment Share on other sites More sharing options...
kieren1234 Posted July 25, 2009 Share Posted July 25, 2009 Must be a typo, what do you guys think this kit is realitically worth?? Link to comment Share on other sites More sharing options...
kieren1234 Posted July 25, 2009 Share Posted July 25, 2009 Just got off the phone to Geo guys as it does look very cheap. He thought he had put £380 but is away fromt he computer just now so cannot edit. Will get him to edit the price when he gets in. Still very cheap though in my opinion?? Link to comment Share on other sites More sharing options...
jamesmark Posted July 25, 2009 Share Posted July 25, 2009 XS power stuff though, so could be overpriced. Link to comment Share on other sites More sharing options...
trinitom Posted July 25, 2009 Share Posted July 25, 2009 more than 280 i'm out! the turbo it self cost £245, but i can get it a bit low than that since channel islands vat is 3% Link to comment Share on other sites More sharing options...
RobSheffield Posted July 25, 2009 Share Posted July 25, 2009 more than 280 i'm out! the turbo it self cost £245, but i can get it a bit low than that since channel islands vat is 3% LOL, last of the big spenders eh Link to comment Share on other sites More sharing options...
kieren1234 Posted July 25, 2009 Share Posted July 25, 2009 more than 280 i'm out! the turbo it self cost £245, but i can get it a bit low than that since channel islands vat is 3% Send him an offer mate, may accept it Link to comment Share on other sites More sharing options...
trinitom Posted July 25, 2009 Share Posted July 25, 2009 LOL, last of the big spenders eh credit crunch times!! Link to comment Share on other sites More sharing options...
jacko Posted July 25, 2009 Share Posted July 25, 2009 Well what does the full set up with FMIC cost from XS power, £800?- So probably about right Link to comment Share on other sites More sharing options...
JamieP Posted July 25, 2009 Share Posted July 25, 2009 Bonus with this kit is the manifold has been clocked for a far neater install, it was the best install i see come from turbofit. Link to comment Share on other sites More sharing options...
kieren1234 Posted July 25, 2009 Share Posted July 25, 2009 Bonus with this kit is the manifold has been clocked for a far neater install, it was the best install i see come from turbofit. Yeah definately makes the FMIC piping easier to fit and alot tidier. Link to comment Share on other sites More sharing options...
Geo Posted July 25, 2009 Author Share Posted July 25, 2009 Right guys, i priced this as is. As i thought it was about right for this little Lot. Yes £280, but as its a bit heavy. it will be £300 Delivered. I reckon thats fair. As Jamie said above it was a neat install done by Turbofit at the time, iv never gone above 0.5 bar on it, so it aint been abused that much. Iv no problems running this and its only out due to my bif build thread or i would have kept this Install in for a good while longer. Trinitom you have OM mate. Link to comment Share on other sites More sharing options...
Chris and Alana Posted July 25, 2009 Share Posted July 25, 2009 I take it this is for a TT? how much power will you be able to get out of this? Link to comment Share on other sites More sharing options...
Geo Posted July 25, 2009 Author Share Posted July 25, 2009 I take it this is for a TT? how much power will you be able to get out of this? Yeah for a TT. Iv no idea what the power would be, as i only had 440cc injectors installed and running 0.5 bar of boost, i reckon with bigger injectors and a good map, it would be 400ish or just over Link to comment Share on other sites More sharing options...
Chris and Alana Posted July 25, 2009 Share Posted July 25, 2009 I would have had it if it was cappable of 500-550max as I have an auto anyway 400 is BPU power and Im already there I'll have a quick google Link to comment Share on other sites More sharing options...
Chris and Alana Posted July 25, 2009 Share Posted July 25, 2009 Also does the downpipe join straight onto the second decat pipe? Sorry for the questions but I am seriously interested Link to comment Share on other sites More sharing options...
Geo Posted July 25, 2009 Author Share Posted July 25, 2009 yeah mate, iv got a an Envy double decat pipe, and it joined with no probs. Might need a gasket though see last to pics at bottom of page. Other than that it good to go. http://www.mkivsupra.net/vbb/showthread.php?t=192480 Link to comment Share on other sites More sharing options...
kieren1234 Posted July 25, 2009 Share Posted July 25, 2009 This will be capable of much more power than BPU. Link to comment Share on other sites More sharing options...
mattyboy1989 Posted July 26, 2009 Share Posted July 26, 2009 could this b adapted for an na-t conversion Link to comment Share on other sites More sharing options...
Geo Posted July 26, 2009 Author Share Posted July 26, 2009 could this b adapted for an na-t conversion no mate, the TT uses a different manifold to the N/A Link to comment Share on other sites More sharing options...
Geo Posted July 26, 2009 Author Share Posted July 26, 2009 Provisonally sold, waiting on Payment. Link to comment Share on other sites More sharing options...
Chris and Alana Posted July 26, 2009 Share Posted July 26, 2009 oh well one less thing to spend money and time on I suppose, who ended up buying it? Link to comment Share on other sites More sharing options...
Recommended Posts