toyo rob Posted June 26, 2009 Share Posted June 26, 2009 ok, have spent quite a bit of time trying to sort out my rltc and bombarded Phil (thanks again - you saved my sanity) with questions. finally after failing miserably to complete the calibration drive i jacked the whole car up and went round manually spinning the wheels and i ended up with a bizarre but logical (to the fault i was suffering) end. somehow the drivers side front abs sensor only works above 10-15 mph. now is that possible - well i have to believe so cause its happening, first i thought dogdy wiring but this happens constantly at the same speed accelerating and decelerating. so question is can you 'clean' or fix them? or is it £80 for a new one? Rob Quote Link to comment Share on other sites More sharing options...
Rob Dublin Posted June 26, 2009 Share Posted June 26, 2009 Aren't abs sensors magnetic? They can get clogged with metal filings, at least I vaguely remember that being the fix from the old Ford Puma forum. Quote Link to comment Share on other sites More sharing options...
bignum Posted June 26, 2009 Share Posted June 26, 2009 As long as there`s no debris stuck to it and the terminals are clean thats all you can do. Quote Link to comment Share on other sites More sharing options...
toyo rob Posted July 2, 2009 Author Share Posted July 2, 2009 thanks, carefully took the sensor out today, and gave it a good clean, and all seems well. so thanks again guys. Rob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.