Ark Posted June 18, 2009 Share Posted June 18, 2009 OK, I've got some new coilovers installed, and they have been fitted with both locking collars wound down onto the ride height adjuster at the bottom. Apparently the force of the spring pushing onto the spring seat automatically locks that. Is this right? Sounds fair, but I'm not sure if it's spurious logic or not. Thanks. Link to comment Share on other sites More sharing options...
mark newman Posted June 18, 2009 Share Posted June 18, 2009 i just fitted bc coilovers to mine. but the two locking collars are up the top .under the spring. and there is one locking collar on the ride height. Link to comment Share on other sites More sharing options...
uk-rich Posted June 18, 2009 Share Posted June 18, 2009 the 2 collars should be locked against one another under the spring, and one collar locked against the ride height adjuster Link to comment Share on other sites More sharing options...
mark newman Posted June 18, 2009 Share Posted June 18, 2009 oh yes Link to comment Share on other sites More sharing options...
Ark Posted June 18, 2009 Author Share Posted June 18, 2009 Cheers - HSD coillys only have two locking collars, so one top and one bottom I guess. Link to comment Share on other sites More sharing options...
uk-rich Posted June 18, 2009 Share Posted June 18, 2009 pic ? Link to comment Share on other sites More sharing options...
Chris Wilson Posted June 25, 2009 Share Posted June 25, 2009 Like this is correct. Two locked together rings under the spring, one to lock the height adjustment. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now